rahul@metal.iitkgp.ac.in
+91-3222-283292
Research Areas
| Year | Category | Title |
|---|---|---|
| 2020 | Journal | Kashyap, Sunil Kumar; Mitra, Rahul; | Densification behavior involving creep during spark plasma sintering of ZrB2-SiC based ultra-high temperature ceramic composites | Ceramics International Vol. 46 No. 4 Page 5028-5036 | Elsevier |
| 2020 | Journal | Sarangi, Chinmaya Kumar; Sahu, Bibhu Prasad; Mishra, Barada Kanta; Mitra, Rahul; | Pulse electrodeposition and characterization of graphene oxide particle-reinforced Ni?W alloy matrix nanocomposite coatings | Journal of Applied Electrochemistry Vol. 50 No. 2 Page 265-279 | Springer Netherlands |
| 2020 | Journal | Chakraborty, A; Kamat, SV; Mitra, R; Ray, KK; | Publication: Journal of Materials Science Pub Date: 2000 | Vol. No. Page | |
| 2020 | Journal | Kumar, NK; Das, J; Mitra, R; | Effect of Moist Air and Minor Zr Addition on Oxidation Behavior of Arc-Melted Multiphase Mo?Si?B Alloys in the Temperature Range of 1000ø C?1300ø C | Oxidation of Metals Vol. 93 No. 5 Page 483-513 | Springer US |
| 2020 | Journal | Xue, Fei; Cheng, Tian-Le; Wen, You-Hai; | Stress Analysis of the Steam-Side Oxide of Boiler Tubes: Contributions from Thermal Strain, Interface Roughness, Creep, and Oxide Growth | Oxidation of Metals Vol. No. Page 43859 | Springer US |
| 2020 | Journal | Villegas?Armenta, LA; Drew, RAL; Pekguleryuz, MO; | The Ignition Behavior of Mg?Ca Binary Alloys: The Role of Heating Rate | OXIDATION OF METALS Vol. 93 No. 43987 Page 545-558 | SPRINGER/PLENUM PUBLISHERS 233 SPRING ST, NEW YORK, NY 10013 USA |
| 2020 | Journal | Hayashi, Shigenari; Maeda, Toma; | Effect of Zr on Initial Oxidation Behavior of FeCrAl Alloys | OXIDATION OF METALS Vol. 93 No. 43987 Page 573-586 | SPRINGER/PLENUM PUBLISHERS 233 SPRING ST, NEW YORK, NY 10013 USA |
| 2020 | Journal | Sahu, Bibhu Prasad; Dutta, Amlan; Mitra, Rahul; | Influence of substrate bias voltage on structure and properties of DC magnetron sputtered Ni?Zr alloy thin films | Journal of Materials Research Vol. No. Page 43843 | Cambridge University Press |
| 2020 | Journal | Mitra, R; Sarkar, S; Ganguli, S; De, BK; | Haemochromatosis in a case of thalassaemia haemoglobin E disease presenting with cirrhosis of liver. | Journal of the Indian Medical Association Vol. 94 No. 1 Page 29-30 | |
| 2020 | Journal | Guguloth, Krishna; Ghosh, M; Swaminathan, J; Mitra, Rahul; | Tensile creep and rupture behavior along with evolution of microstructure in a Zr-2.5 Nb alloy | Materials Science and Engineering: A Vol. No. Page 139681 | Elsevier |
| 2020 | Journal | Sahu, Bibhu Prasad; Dutta, Amlan; Mitra, Rahul; | A combined electron microscopy and atom probe tomography study of the nanocrystalline Ni-Zr thin film | Journal of Alloys and Compounds Vol. 844 No. Page 156078 | Elsevier |
| 2020 | Journal | Kashyap, Sunil Kumar; Kumar, Ankit; Mitra, Rahul; | Kinetics and evolution of oxide scale during various stages of isothermal oxidation at 1300ø C in spark plasma sintered ZrB2?SiC?LaB6 composites | Journal of the European Ceramic Society Vol. No. Page | Elsevier |
| 2020 | Journal | Sahu, Bibhu Prasad; Ray, Monali; Mitra, Rahul; | Structure and properties of Ni1-xTixN thin films processed by reactive magnetron co-sputtering | Materials Characterization Vol. No. Page 110604 | Elsevier |
| 2019 | Journal | Bhattacharya, Ankita; Bokinala, Praveen Kumar; Mitra, Rahul; Chakrabarti, Debalay; | Relative effect of C and Mn on strength-toughness of medium Mn steels | Materials Science and Technology Vol. 35 No. 1 Page 55-67 | Taylor & Francis |
| 2019 | Journal | Patra, Sudipta; Mandal, Abhisek; Mandal, Madhumanti; Kumar, Vinod; Mitra, Rahul; Chakrabarti, Debalay; | Ferrite Grain Refinement, Grain Size Distribution, and Texture After Thermomechanical Processing and Continuous Cooling of Low-C Steel | Metallurgical and Materials Transactions A Vol. 50 No. 2 Page 947-965 | Springer US |
| Year | Category | Title |
|---|---|---|
| 2020 | Journal | Kashyap, Sunil Kumar; Mitra, Rahul; | Densification behavior involving creep during spark plasma sintering of ZrB2-SiC based ultra-high temperature ceramic composites | Ceramics International Vol. 46 No. 4 Page 5028-5036 | Elsevier |
| 2020 | Journal | Sarangi, Chinmaya Kumar; Sahu, Bibhu Prasad; Mishra, Barada Kanta; Mitra, Rahul; | Pulse electrodeposition and characterization of graphene oxide particle-reinforced Ni?W alloy matrix nanocomposite coatings | Journal of Applied Electrochemistry Vol. 50 No. 2 Page 265-279 | Springer Netherlands |
| 2020 | Journal | Chakraborty, A; Kamat, SV; Mitra, R; Ray, KK; | Publication: Journal of Materials Science Pub Date: 2000 | Vol. No. Page | |
| 2020 | Journal | Kumar, NK; Das, J; Mitra, R; | Effect of Moist Air and Minor Zr Addition on Oxidation Behavior of Arc-Melted Multiphase Mo?Si?B Alloys in the Temperature Range of 1000ø C?1300ø C | Oxidation of Metals Vol. 93 No. 5 Page 483-513 | Springer US |
| 2020 | Journal | Xue, Fei; Cheng, Tian-Le; Wen, You-Hai; | Stress Analysis of the Steam-Side Oxide of Boiler Tubes: Contributions from Thermal Strain, Interface Roughness, Creep, and Oxide Growth | Oxidation of Metals Vol. No. Page 43859 | Springer US |
| 2020 | Journal | Villegas?Armenta, LA; Drew, RAL; Pekguleryuz, MO; | The Ignition Behavior of Mg?Ca Binary Alloys: The Role of Heating Rate | OXIDATION OF METALS Vol. 93 No. 43987 Page 545-558 | SPRINGER/PLENUM PUBLISHERS 233 SPRING ST, NEW YORK, NY 10013 USA |
| 2020 | Journal | Hayashi, Shigenari; Maeda, Toma; | Effect of Zr on Initial Oxidation Behavior of FeCrAl Alloys | OXIDATION OF METALS Vol. 93 No. 43987 Page 573-586 | SPRINGER/PLENUM PUBLISHERS 233 SPRING ST, NEW YORK, NY 10013 USA |
| 2020 | Journal | Sahu, Bibhu Prasad; Dutta, Amlan; Mitra, Rahul; | Influence of substrate bias voltage on structure and properties of DC magnetron sputtered Ni?Zr alloy thin films | Journal of Materials Research Vol. No. Page 43843 | Cambridge University Press |
| 2020 | Journal | Mitra, R; Sarkar, S; Ganguli, S; De, BK; | Haemochromatosis in a case of thalassaemia haemoglobin E disease presenting with cirrhosis of liver. | Journal of the Indian Medical Association Vol. 94 No. 1 Page 29-30 | |
| 2020 | Journal | Guguloth, Krishna; Ghosh, M; Swaminathan, J; Mitra, Rahul; | Tensile creep and rupture behavior along with evolution of microstructure in a Zr-2.5 Nb alloy | Materials Science and Engineering: A Vol. No. Page 139681 | Elsevier |
| 2020 | Journal | Sahu, Bibhu Prasad; Dutta, Amlan; Mitra, Rahul; | A combined electron microscopy and atom probe tomography study of the nanocrystalline Ni-Zr thin film | Journal of Alloys and Compounds Vol. 844 No. Page 156078 | Elsevier |
| 2020 | Journal | Kashyap, Sunil Kumar; Kumar, Ankit; Mitra, Rahul; | Kinetics and evolution of oxide scale during various stages of isothermal oxidation at 1300ø C in spark plasma sintered ZrB2?SiC?LaB6 composites | Journal of the European Ceramic Society Vol. No. Page | Elsevier |
| 2020 | Journal | Sahu, Bibhu Prasad; Ray, Monali; Mitra, Rahul; | Structure and properties of Ni1-xTixN thin films processed by reactive magnetron co-sputtering | Materials Characterization Vol. No. Page 110604 | Elsevier |
| 2019 | Journal | Bhattacharya, Ankita; Bokinala, Praveen Kumar; Mitra, Rahul; Chakrabarti, Debalay; | Relative effect of C and Mn on strength-toughness of medium Mn steels | Materials Science and Technology Vol. 35 No. 1 Page 55-67 | Taylor & Francis |
| 2019 | Journal | Patra, Sudipta; Mandal, Abhisek; Mandal, Madhumanti; Kumar, Vinod; Mitra, Rahul; Chakrabarti, Debalay; | Ferrite Grain Refinement, Grain Size Distribution, and Texture After Thermomechanical Processing and Continuous Cooling of Low-C Steel | Metallurgical and Materials Transactions A Vol. 50 No. 2 Page 947-965 | Springer US |
| 2019 | Journal | Sahu, Bibhu Prasad; Dutta, Amlan; Mitra, Rahul; | Mechanism of negative strain rate sensitivity in metallic glass film | Journal of Alloys and Compounds Vol. 784 No. Page 488-499 | Elsevier |
| 2019 | Journal | Kumar, NK; Das, J; Mitra, R; | Effect of Zr Addition on microstructure, hardness and oxidation behavior of arc-melted and spark plasma sintered multiphase Mo-Si-B alloys | Metallurgical and Materials Transactions A Vol. 50 No. 4 Page 2041-2060 | Springer US |
| 2019 | Journal | Morankar, Swapnil; Mandal, Monalisa; Kourra, Nadia; Williams, Mark A; Mitra, Rahul; Srirangam, Prakash; | X-Ray Tomography Study on Porosity and Particle Size Distribution in In Situ Al-4.5 Cu-5TiB 2 Semisolid Rolled Composites | JOM Vol. 71 No. 11 Page 4050-4058 | Springer US |
| 2019 | Journal | Mitra, Rahul; | Oxidation Behavior of Silicides | Diffusion Foundations Vol. 21 No. Page 127-156 | Trans Tech Publications Ltd |
| 2019 | Journal | Kashyap, Sunil Kumar; Mitra, Rahul; | Effect of LaB6 additions on densification, microstructure, and creep with oxide scale formation in ZrB2-SiC composites sintered by spark plasma sintering | Journal of the European Ceramic Society Vol. 39 No. 9 Page 2782-2793 | Elsevier |
| 2019 | Journal | Kumar, NK; Mitra, R; Das, J; | Effect of moist environment on the oxidation behavior of Mo76-xSi14B10Fex (x= 0, 0.5, 1 at.%) ultrafine composites in the range of 700?800ø C | Corrosion Science Vol. 155 No. Page 86-96 | Pergamon |
| 2019 | Journal | Chatterjee, Arya; Modak, P; Barat, K; Chakrabarti, D; Mitra, R; | Microstructural Stability During Creep Exposure of 9Cr-1Mo Steel Treated at Different Normalization Temperatures | Journal of Materials Engineering and Performance Vol. 28 No. 5 Page 3076-3093 | Springer US |
| 2019 | Journal | Kumar, NK; Mitra, R; Das, J; | Effect of Fe addition and moist environment on the high temperature oxidation behavior of Mo76-xSi14B10Fex (x= 0, 0.5, 1 at.%) composites | Intermetallics Vol. 111 No. Page 106498 | Elsevier |
| 2019 | Journal | Mandal, Monalisa; Mitra, Rahul; | Effect of microstructure and microtexture evolution on creep behavior of hot-rolled and mushy-state rolled Al-4.5 Cu-5TiB2 in-situ composite | Materials Science and Engineering: A Vol. 760 No. Page 88-104 | Elsevier |
| 2019 | Journal | MITRA, R; MADAN, A; HOFFMAN, RA; CHIOU, WA; WEERTMAN, JR; | EFFECT OF ANNEALING ON MICROSTRUCTURE AND | Vol. No. Page | |
| 2019 | Journal | Sahu, Bibhu Prasad; Chatterjee, Arya; Dutta, Amlan; Mitra, Rahul; | In-situ and ex-situ study of crystallization behaviour of magnetron sputtered Ni63Zr37 amorphous thin film | Philosophical Magazine Vol. 99 No. 20 Page 2545-2561 | Taylor & Francis |
| 2019 | Journal | Mandal, Monalisa; Mitra, Rahul; | Study of Dry Sliding Wear Behavior of Hot-Rolled and Mushy-State Rolled Al-4.5 Cu-5TiB 2 In-Situ Composite with Analysis of Work Hardening and Subsurface Microstructure-Microtexture Evolution Using EBSD | Metallurgical and Materials Transactions A Vol. 50 No. 11 Page 5356-5372 | Springer US |
| 2019 | Journal | Sahu, Bibhu Prasad; Dutta, Amlan; Mitra, Rahul; | Influence of Composition on Nanoindentation Response of Ni-Zr Alloy Thin Films | Metallurgical and Materials Transactions A Vol. 50 No. 12 Page 5656-5669 | Springer US |
| 2019 | Journal | Kumar Dwivedi, Sai; Gupta, Vikram; Mitra, Rahul; Ahmed, Shuaib; Jain, Arjun; | Protogan: Towards few shot learning for action recognition | Proceedings of the IEEE International Conference on Computer Vision Workshops Vol. No. Page 0-0 | |
| 2018 | Journal | Mitra, R; | Oxidation and environmental degradation of intermetallic matrix composites | Intermetallic Matrix Composites Vol. No. Page 321-358 | Woodhead Publishing |
| 2018 | Journal | Mitra, R; | Molybdenum silicide-based composites | Intermetallic Matrix Composites Vol. No. Page 95-146 | Woodhead Publishing |
| 2018 | Journal | Barick, Prasenjit; Chatterjee, Arya; Majumdar, Bhaskar; Saha, Bhaskar Prasad; Mitra, Rahul; | Comparative evaluations and microstructure: mechanical property relations of sintered silicon carbide consolidated by various techniques | Metallurgical and Materials Transactions A Vol. 49 No. 4 Page 1182-1201 | Springer US |
| 2018 | Journal | Guguloth, Krishna; Mitra, Rahul; Chowdhury, Sandip Ghosh; Swaminathan, J; | Mechanism of creep deformation with evolution of microstructure and texture of Zr-2.5 Nb alloy | Materials Science and Engineering: A Vol. 721 No. Page 286-302 | Elsevier |
| 2018 | Journal | Barick, Prasenjit; Mitra, Rahul; Saha, Bhaskar Prasad; | Influence of a few important parameters on the rheological behaviour of silicon carbide nanoparticles dispersed aqueous suspension | Ceramics International Vol. 44 No. 8 Page 9070-9075 | Elsevier |
| 2018 | Journal | Chatterjee, Arya; Ghosh, A; Moitra, A; Bhaduri, AK; Mitra, R; Chakrabarti, D; | Role of hierarchical martensitic microstructure on localized deformation and fracture of 9Cr-1Mo steel under impact loading at different temperatures | International Journal of Plasticity Vol. 104 No. Page 104-133 | Pergamon |
| 2018 | Journal | Mitra, Rahul; | Environmental Nonprofit Organizations and Networked Publics: Case Studies of Water Sustainability | Vol. No. Page | |
| 2018 | Journal | Modak, Pranabananda; Patra, Sudipta; Mitra, Rahul; Chakrabarti, Debalay; | Effect of starting as-cast structure on the microstructure?texture evolution during subsequent processing and finally ridging behavior of ferritic stainless steel | Metallurgical and Materials Transactions A Vol. 49 No. 6 Page 2219-2234 | Springer US |
| 2018 | Journal | Sahu, Bibhu Prasad; Sarangi, Chinmaya Kumar; Mitra, Rahul; | Effect of Zr content on structure property relations of Ni-Zr alloy thin films with mixed nanocrystalline and amorphous structure | Thin Solid Films Vol. 660 No. Page 31-45 | Elsevier |
| 2018 | Journal | Kumar, Mukesh; Mitra, Rahul; | Comparative Study of Effects of Alloying with Cu and TiN Addition in Ni-Matrix onResidual Stress and Microstructure | Vol. No. Page | |
| 2018 | Journal | Mitra, R; Wanhill, RJH; | FINAL DRAFT V1CH10: STRUCTURAL INTERMETALLICS | Vol. No. Page | |
| 2018 | Journal | Bagui, Sumanta; Laha, Kinkar; Mitra, Rahul; Tarafder, Soumitra; | Accelerated creep behavior of Nb and Cu added 18Cr-8Ni austenitic stainless steel | Materials Research Express Vol. 5 No. 11 Page 116515 | IOP Publishing |
| 2018 | Journal | Mandal, Monalisa; Mitra, Rahul; | Effect of pre-cold rolling on the evolution of microstructure, microtexture, and mechanical properties of the mushy state rolled in-situ Al-4.5 Cu-5TiB2 composite | Materials Characterization Vol. 146 No. Page 267-278 | Elsevier |
| 2018 | Journal | Mitra, Rahul; | Intermetallic matrix composites | Properties and Applications; Woodhead Publishing: Duxford, UK Vol. No. Page | |
| 2018 | Journal | Mitra, Rahul; | Structural intermetallics and intermetallic-matrix composites: An introduction | Intermetallic Matrix Composites Vol. No. Page 43848 | Elsevier |
| 2017 | Journal | Effect of SiC content on electrical, thermal, and ablative properties of pressureless sintered ZrB2-based ultrahigh temperature ceramic composites by Mallik M., Kailath A. J., Ray K. K., Mitra R. Journal of the European Ceramic Society 37 3863-3877 (2017) |
| 2017 | Journal | Mallik, Manab; Kailath, Ansu J; Ray, KK; Mitra, R; | Effect of SiC content on electrical, thermal and ablative properties of pressureless sintered ZrB2-based ultrahigh temperature ceramic composites | Journal of the European Ceramic Society Vol. 37 No. 2 Page 559-572 | Elsevier |
| 2017 | Journal | Mitra, R; Wanhill, RJH; | Structural Intermetallics | Aerospace Materials and Material Technologies Vol. No. Page 229-245 | Springer, Singapore |
| 2017 | Journal | Das, J; Roy, B; Kumar, NK; Mitra, R; | High temperature oxidation response of Al/Ce doped Mo?Si?B composites | Intermetallics Vol. 83 No. Page 101-109 | Elsevier |
| 2017 | Journal | Kumar, Mukesh; Mitra, R; | Effect of substrate temperature and annealing on structure, stress and properties of reactively co-sputtered Ni-TiN nanocomposite thin films | Thin Solid Films Vol. 624 No. Page 70-82 | Elsevier |
| 2017 | Journal | Karmakar, Anish; Sahu, Pooja; Neogy, Suman; Chakrabarti, Debalay; Mitra, Rahul; Mukherjee, Subrata; Kundu, Saurabh; | Effect of cooling rate and chemical composition on microstructure and properties of naturally cooled vanadium-microalloyed steels | Metallurgical and Materials Transactions A Vol. 48 No. 4 Page 1581-1595 | Springer US |
| 2017 | Journal | Sahu, Bibhu P; Mitra, Rahul; | Effect of annealing and process parameters on microstructure and properties of DC magnetron sputtered Ni-Zr alloy thin films | MRS Advances Vol. 2 No. 27 Page 1441-1448 | Materials Research Society |
| 2017 | Journal | Maji, Poulami; Mitra, R; Ray, KK; | Effect of Cr on the evolution of microstructures in as-cast ternary niobium-silicide-based composites | Intermetallics Vol. 85 No. Page 34-47 | Elsevier |
| 2017 | Journal | Chatterjee, Arya; Dutta, A; Sk, Md Basiruddin; Mitra, R; Bhaduri, AK; Chakrabarti, D; | Effect of Microalloy Precipitates on the Microstructure and Texture of Hot-Deformed Modified 9Cr-1Mo Steel | Metallurgical and Materials Transactions A Vol. 48 No. 5 Page 2410-2424 | Springer US |
| 2017 | Journal | Kumar, NK; Roy, B; Mitra, R; Das, J; | Improvement of oxidation resistance of arc-melted Mo76Si14B10 by microstructure control upon minor Fe addition | Intermetallics Vol. 88 No. Page 28-30 | Elsevier |
| 2017 | Journal | Mallik, Manab; Ray, Kalyan Kumar; Mitra, Rahul; | Effect of Si3N4 Addition on Oxidation Resistance of ZrB2-SiC Composites | Coatings Vol. 7 No. 7 Page 92 | Multidisciplinary Digital Publishing Institute |
| 2017 | Journal | Karmakar, Anish; Mukherjee, Subrata; Kundu, Saurabh; Srivastava, Dinesh; Mitra, Rahul; Chakrabarti, Debalay; | Effect of composition and isothermal holding temperature on the precipitation hardening in Vanadium-microalloyed steels | Materials Characterization Vol. 132 No. Page 31-40 | Elsevier |
| 2017 | Journal | Mitra, Rahul; | Intermetallic Matrix Composites: Properties and Applications | Vol. No. Page | Elsevier |
| 2016 | Journal | Barick, Prasenjit; Chakravarty, Dibyendu; Saha, Bhaskar Prasad; Mitra, Rahul; Joshi, Shrikant V; | Effect of pressure and temperature on densification, microstructure and mechanical properties of spark plasma sintered silicon carbide processed with ?-silicon carbide nanopowder and sintering additives | Ceramics International Vol. 42 No. 3 Page 3836-3848 | Elsevier |
| 2016 | Journal | Chatterjee, Arya; Mitra, R; Chakraborty, AK; Rotti, C; Ray, KK; | Comparative study of approaches to assess damage in thermally fatigued CuCrZr alloy | Journal of Nuclear Materials Vol. 474 No. Page 120-125 | North-Holland |
| 2016 | Journal | Mandal, Monalisa; Mitra, Rahul; | Effect of Mushy State Rolling on the Microstructure, Microhardness, and Microtexture in Al-4.5 wt.% Cu-5wt.% TiB 2 In Situ Composite | Jom Vol. 68 No. 7 Page 1902-1908 | Springer US |
| 2016 | Journal | Karmakar, Anish; Mandal, Abhisek; Mukherjee, Subrata; Kundu, Saurbh; Srivastava, Dinesh; Mitra, Rahul; Chakrabarti, Debalay; | Effect of isothermal holding temperature on the precipitation hardening in Vanadium-microalloyed steels with varying carbon and nitrogen levels | arXiv preprint arXiv:1607.02721 Vol. No. Page | |
| 2016 | Journal | Barick, Prasenjit; Saha, Bhaskar Prasad; Joshi, Shrikant V; Mitra, Rahul; | Spray-freeze-dried nanosized silicon carbide containing granules: Properties, compaction behaviour and sintering | Journal of the European Ceramic Society Vol. 36 No. 16 Page 3863-3877 | Elsevier |
| 2016 | Journal | Guguloth, Krishna; Swaminathan, J; Mitra, Rahul; Ghosh, RN; Singh, RN; Chakravartty, JK; | Effect of texture on creep deformation behavior of Zr-2.5 Nb alloy | Proceedings of the seventh international conference on creep, fatigue and creep-fatigue interaction Vol. No. Page | |
| 2015 | Journal | Structural Intermetallics and Intermetallic Matrix Composites by Rahul Mitra Structural Intermetallics and Intermetallic Matrix Composites - (2015) |
| 2015 | Journal | Barick, Prasenjit; Saha, Bhaskar Prasad; Mitra, Rahul; Joshi, Shrikant V; | Effect of concentration and molecular weight of polyethylenimine on zeta potential, isoelectric point of nanocrystalline silicon carbide in aqueous and ethanol medium | Ceramics International Vol. 41 No. 3 Page 4289-4293 | Elsevier |
| 2015 | Journal | Chatterjee, Arya; Chakrabarti, D; Moitra, A; Mitra, R; Bhaduri, AK; | Effect of deformation temperature on the ductile?brittle transition behavior of a modified 9Cr?1Mo steel | Materials Science and Engineering: A Vol. 630 No. Page 58-70 | Elsevier |
| 2015 | Journal | Verma, Jitendra; Vijayakumar, M; Mitra, R; | Processing and microstructure of freeze-cast silica foams | Materials Letters Vol. 153 No. Page 168-170 | North-Holland |
| 2015 | Journal | Chatterjee, A; Mitra, R; Chakraborty, AK; Rotti, C; Ray, KK; | ON THE THERMAL FATIGUE BEHAVIOUR OF A Cu-Cr-Zr ALLOY | Vol. No. Page | |
| 2015 | Journal | Telu, Suresh; Mitra, Rahul; Pabi, Shyamal Kumar; | Effect of Y 2 O 3 addition on oxidation behavior of W-Cr alloys | Metallurgical and Materials Transactions A Vol. 46 No. 12 Page 5909-5919 | Springer US |
| 2015 | Journal | Chatterjee, Arya; Moitra, A; Bhaduri, AK; Mitra, R; Chakrabarti, D; | Dynamic fracture behaviour of thermo-mechanically processed modified 9Cr?1Mo steel | Engineering Fracture Mechanics Vol. 149 No. Page 74-88 | Pergamon |
| 2015 | Journal | Mitra, Rahul; | Structural intermetallics and intermetallic matrix composites | Vol. No. Page | CRC Press |
| 2014 | Journal | Effect of Si3N4 addition on compressive creep behavior of hot pressed ZrB2-SiC composites by Manab Mallik, K.K. Ray, and R. Mitra Journal of the American Ceramic Society 97(9) 2957-64 (2014) |
| 2014 | Journal | Kumar, Mukesh; Mitra, R; | Effect of substrate bias on microstructure and properties of Ni?TiN nanocomposite thin films deposited by reactive magnetron co-sputtering | Surface and Coatings Technology Vol. 251 No. Page 239-246 | Elsevier |
| 2014 | Journal | Mehta, Kumud Kant; Mitra, R; Chawla, Sanjay; | Effect of post-solutionizing cooling rate on microstructure and low cycle fatigue behavior of a cast nickel based superalloy | Materials Science and Engineering: A Vol. 611 No. Page 280-289 | Elsevier |
| 2014 | Journal | Mallik, Manab; Ray, Kalyan Kumar; Mitra, Rahul; | Effect of Si 3 N 4 Addition on Compressive Creep Behavior of Hot?Pressed ZrB 2?SiC Composites | Journal of the American Ceramic Society Vol. 97 No. 9 Page 2957-2964 | |
| 2014 | Journal | Narasayya, Ch VA; Rambabu, P; Mohan, MK; Mitra, Rahul; Prasad, N Eswara; | Tensile deformation and fracture behaviour of an aerospace aluminium alloy AA2219 in different ageing conditions | Procedia materials science Vol. 6 No. Page 322-330 | Elsevier |
| 2014 | Journal | Chatterjee, Arya; Chakrabarti, D; Moitra, A; Mitra, R; Bhaduri, AK; | Effect of normalization temperatures on ductile?brittle transition temperature of a modified 9Cr?1Mo steel | Materials Science and Engineering: A Vol. 618 No. Page 219-231 | Elsevier |
| 2014 | Journal | Chatterjee, Arya; Moitra, A; Bhaduri, AK; Chakrabarti, D; Mitra, R; | Effect of heat treatment on ductile-brittle transition behaviour of 9Cr-1Mo steel | Procedia Engineering Vol. 86 No. Page 287-294 | Elsevier |
| 2014 | Journal | Das, J; Roy, B; Mitra, R; | Paper No. MC31 | Vol. No. Page | |
| 2013 | Journal | Transient stage oxidation behavior of Mo76Si14B10 alloy at 1150 °C by Barna Roy, J. Das and R. Mitra Corrosion Science 68 231-237 (2013) |
| 2013 | Journal | Effect of Ar:N2 ratio on structure and properties of Ni-TiN nanocomposite thin films processed by reactive RF/DC magnetron sputtering by Mukesh Kumar, S. Mishra, and R. Mitra Surface and Coatings Technology 228 100-114 (2013) |
| 2013 | Journal | Telu, Suresh; Patra, A; Sankaranarayana, M; Mitra, R; Pabi, SK; | Microstructure and cyclic oxidation behavior of W?Cr alloys prepared by sintering of mechanically alloyed nanocrystalline powders | International Journal of Refractory Metals and Hard Materials Vol. 36 No. Page 191-203 | Elsevier |
| 2013 | Journal | Telu, S; Mitra, R; Pabi, SK; | Densification and characterisation of W?Cr?Nb alloys prepared by sintering of mechanically alloyed nanocrystalline powders | Powder metallurgy Vol. 56 No. 1 Page 83-88 | Taylor & Francis |
| 2013 | Journal | Roy, B; Das, J; Mitra, R; | Transient stage oxidation behavior of Mo76Si14B10 alloy at 1150 C | Corrosion science Vol. 68 No. Page 231-237 | Pergamon |
| 2013 | Journal | Roy, Barna; Das, Jayanta; Mitra, Rahul; Roy, Sanat Kumar; | Effect of Oxygen Partial Pressure on the Cyclic Oxidation Behavior of Mo 76 Si 14 B 10 | Metallurgical and Materials Transactions A Vol. 44 No. 7 Page 2910-2913 | Springer US |
| 2013 | Journal | Verma, Jitendra; Mitra, R; Vijayakumar, M; | Processing of silica foam using steam heating and its characterization | Journal of the European Ceramic Society Vol. 33 No. 5 Page 943-951 | Elsevier |
| 2013 | Journal | Chatterjee, Arya; Mitra, R; Chakraborty, AK; Rotti, C; Ray, KK; | Thermal fatigue damage of Cu?Cr?Zr alloys | Journal of nuclear materials Vol. 443 No. 43891 Page 44059 | North-Holland |
| 2013 | Journal | Jana, A; Siddhalingeshwar, IG; Mitra, R; | Effect of homogeneity of particle distribution on tensile crack propagation in mushy state rolled in situ Al?4.5 Cu?5TiB2 particulate composite | Materials Science and Engineering: A Vol. 575 No. Page 104-110 | Elsevier |
| 2013 | Journal | Telu, Suresh; Patra, A; Sankaranarayana, M; Mitra, R; Pabi, SK; | Microstructure and cyclic oxidation behavior of W?Cr alloys prepared by sintering of mechanically alloyed nanocrystalline powders | International Journal of Refractory Metals and Hard Materials Vol. 36 No. Page 191-203 | Elsevier |
| 2013 | Journal | Mallik, Manab; Roy, Sabyasachi; Ray, KK; Mitra, R; | Effect of SiC content, additives and process parameters on densification and structure?property relations of pressureless sintered ZrB2?SiC composites | Ceramics International Vol. 39 No. 3 Page 2915-2932 | Elsevier |
| 2013 | Journal | Kumar, Mukesh; Mishra, S; Mitra, R; | Effect of Ar: N2 ratio on structure and properties of Ni?TiN nanocomposite thin films processed by reactive RF/DC magnetron sputtering | Surface and Coatings Technology Vol. 228 No. Page 100-114 | Elsevier |
| 2013 | Journal | Telu, Suresh; Mitra, Rahul; Pabi, Shyamal Kumar; | High temperature oxidation behavior of W?Cr?Nb Alloys in the Temperature Range of 800?1200ø C | International Journal of Refractory Metals and Hard Materials Vol. 38 No. Page 47-59 | Elsevier |
| 2013 | Journal | Mallik, Manab; Roy, KK; Mitra, Rahul; Talapatra, Animesh; | Characterization Of Structure-Thermo-Mechanical Properties Of Ultra High Temperature Ceramic Composites (UHTCCS) By Nondestructive Testing (NDT) | i-Manager's Journal on Mechanical Engineering Vol. 3 No. 3 Page 23 | iManager Publications |
| 2012 | Journal | Electrical and thermophysical properties of ZrB2 and HfB2 based composites by Manab Mallik, Ansu J. Kailath, K.K. Ray and R. Mitra Journal of the European Ceramic Society 32 2545-2555 (2012) |
| 2012 | Journal | Mallik, Manab; Kailath, Ansu J; Ray, KK; Mitra, R; | Electrical and thermophysical properties of ZrB2 and HfB2 based composites | Journal of the European Ceramic Society Vol. 32 No. 10 Page 2545-2555 | Elsevier |
| 2012 | Journal | Telu, Suresh; Karthik, Vaduganathan; Mitra, Rahul; Pabi, Shyamal Kumar; | Effect of 10 at.% Nb addition on Sintering and High Temperature Oxidation of W0. 5Cr0. 5 Alloy | Materials Science Forum Vol. 710 No. Page 308-313 | Trans Tech Publications Ltd |
| 2012 | Journal | Sreedhar, V; Das, J; Mitra, R; Roy, SK; | Influence of superficial CeO2 coating on high temperature oxidation behavior of Ti?6Al?4V | Journal of alloys and compounds Vol. 519 No. Page 106-111 | Elsevier |
| 2012 | Journal | Roy, D; Mitra, R; Ojo, OA; Singh, SS; Kolesnikov, D; Lojkowski, W; Scattergood, RO; Koch, CC; Manna, Indranil; | Evaluation of mechanical properties of partially amorphous and nanocrystalline Al50Ti40Si10 composites prepared by mechanical alloying and hot isostatic pressing | Materials Science and Engineering: A Vol. 555 No. Page 21-27 | Elsevier |
| 2012 | Journal | Chakraborty, M; Mandal, A; Kumar, GS Vinod; Ravi, KR; Siddhalingeshwar, IG; Mitra, R; Murty, BS; | Recent Developments in Aluminium Alloy Reinforced Titanium Diboride in-situ Composites | Indian Foundry Journal Vol. 58 No. 11 Page | |
| 2012 | Journal | Pavitra, K; Mitra, R; | Effect of age-hardening on dry sliding wear behavior of mushy state rolled in-situ Al-4.5 Cu-5TiB2 composites | Materials Science and Engineering: A Vol. 557 No. Page 84-91 | Elsevier |
| 2012 | Journal | Bhattacharyya, Jishnu J; Mitra, R; | Effect of hot rolling temperature and thermal cycling on creep and damage behavior of powder metallurgy processed Al?SiC particulate composite | Materials Science and Engineering: A Vol. 557 No. Page 92-105 | Elsevier |
| 2011 | Journal | Mallik, Manab; Ray, KK; Mitra, R; | Oxidation behavior of hot pressed ZrB2?SiC and HfB2?SiC composites | Journal of the European Ceramic Society Vol. 31 No. 43862 Page 199-215 | Elsevier |
| 2011 | Journal | Siddhalingeshwar, IG; Herbert, MA; Chakraborty, M; Mitra, R; | Effect of mushy state rolling on age-hardening and tensile behavior of Al?4.5 Cu alloy and in situ Al?4.5 Cu?5TiB2 composite | Materials Science and Engineering: A Vol. 528 No. 3 Page 1787-1798 | Elsevier |
| 2011 | Journal | Das, J; Mitra, R; Roy, SK; | Oxidation behaviour of Mo?Si?B?(Al, Ce) ultrafine-eutectic dendrite composites in the temperature range of 500?700ø C | Intermetallics Vol. 19 No. 1 Page 44044 | Elsevier |
| 2011 | Journal | Siddhalingeshwar, IG; Deepthi, D; Chakraborty, M; Mitra, R; | Sliding wear behavior of in situ Al?4.5 Cu?5TiB2 composite processed by single and multiple roll passes in mushy state | Wear Vol. 271 No. 43987 Page 748-759 | Elsevier |
| 2011 | Journal | Das, J; Mitra, R; Roy, SK; | Effect of Ce addition on the oxidation behaviour of Mo?Si?B?Al ultrafine composites at 1100ø C | Scripta Materialia Vol. 64 No. 6 Page 486-489 | Pergamon |
| 2011 | Journal | Roy, D; Mitra, R; Ojo, OA; Lojkowski, W; Manna, Indranil; | Microstructural Evolution and Mechanical Properties of Nanointermetallic Phase Dispersed Al 65 Cu 20 Ti 15 Amorphous Matrix Composite Synthesized by Mechanical Alloying and Hot Isostatic Pressing | Metallurgical and Materials Transactions A Vol. 42 No. 8 Page 2498-2508 | Springer US |
| 2011 | Journal | Sarkar, Sourav; Sekaran, VG; Badisch, E; Roy, Manish; Mitra, R; | Reciprocating Wear Behaviour of Two Dimensionally Reinforced Carbon-Phenolic and Carbon-Epoxy Composites | International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME) Vol. 1 No. 4 Page 46-57 | IGI Global |
| 2011 | Journal | Roy, D; Mitra, R; Ojo, O; Lojkowski, W; Manna, I; | Microstructural Evolution and Mechanical Properties of Nanointermetallic Phase Dispersed AlCuTi Amorphous Matrix Composite Synthesized by Mechanical Alloying and Hot Isostatic Pressing. | Metallurgical & Materials Transactions. Part A Vol. 42 No. 8 Page | |
| 2010 | Journal | Ahn, Byungmin; Mitra, Rahul; Lavernia, Enrique J; Nutt, Steven R; | Effect of grain size on strain rate sensitivity of cryomilled Al?Mg alloy | Journal of materials science Vol. 45 No. 17 Page 4790-4795 | Springer US |
| 2010 | Journal | Mishra, Sarika; Mitra, R; Vijayakumar, M; | Structure?property correlation in cellular silica processed through hydrophobized fused silica powder for aerospace application | Journal of alloys and compounds Vol. 504 No. 1 Page 76-82 | Elsevier |
| 2010 | Journal | Mishra, Sarika; Mitra, R; | Comparison between the process?structure?property relationships of silica foams prepared through two different processing routes | Journal of materials science Vol. 45 No. 15 Page 4115-4125 | Springer US |
| 2010 | Journal | Chatterjee, D; Hazari, N; Das, N; Mitra, R; | Microstructure and creep behavior of DMS4-type nickel based superalloy single crystals with orientations near< 0 0 1> and< 0 1 1 | Materials Science and Engineering: A Vol. 528 No. 2 Page 604-613 | Elsevier |
| 2010 | Journal | Sarkar, S; Badisch, E; Mitra, R; Roy, Manish; | Impact abrasive wear response of carbon/carbon composites at elevated temperatures | Tribology letters Vol. 37 No. 2 Page 445-451 | Springer US |
| 2010 | Journal | Sarkar, Sourav; Kumari, Sweety; Sekaran, VG; Mitra, R; | Strength and fracture behavior of two-, three-and four-dimensionally reinforced carbon/carbon composites | Materials Science and Engineering: A Vol. 527 No. 44050 Page 1835-1843 | Elsevier |
| 2010 | Journal | Pal, Sharmilee; Ray, KK; Mitra, R; | Room temperature mechanical properties and tensile creep behavior of powder metallurgy processed and hot rolled Al and Al?SiCp composites | Materials Science and Engineering: A Vol. 527 No. 26 Page 6831-6837 | Elsevier |
| 2010 | Journal | Herbert, MA; Das, Goutam; Maiti, R; Chakraborty, M; Mitra, R; | Tensile properties of cast and mushy state rolled Al?4ú 5Cu alloy and in situ Al4ú 5Cu?5TiB2 composite | International Journal of Cast Metals Research Vol. 23 No. 4 Page 216-224 | Taylor & Francis |
| 2010 | Journal | Mallik, Manaba; Mitra, Rahul; Ray, Kalyan Kumar; | Effect of Particulate Volume Fraction on Mechanical Properties of Pressureless Sintered ZrB2?SiC Ultra?High Temperature Ceramic Composites | Processing and Properties of Advanced Ceramics and Composites II Vol. 220 No. Page 77-87 | John Wiley & Sons, Inc. Hoboken, NJ, USA |
| 2010 | Journal | Mishra, Sarika; Mitra, R; | Isopropanol as an air?liquid interface reformer in the processing of cellular silica | Journal of alloys and compounds Vol. 506 No. 1 Page 308-312 | Elsevier |
| 2010 | Journal | Mishra, Sarika; Mitra, R; | Rational design in suspension rheology of cellular silica | Colloids and Surfaces A: Physicochemical and Engineering Aspects Vol. 370 No. 43891 Page 102-112 | Elsevier |
| 2010 | Journal | Shiferaw, Dereje; Mitra, R; | Comparison of Numerical and Neural Network Forward Kinematics Estimations for Stewart Platform Manipulator | 4th International Conference on Computer Applications in Electrical Engineering Recent Advances February 19?21, 2010 Vol. No. Page 272 | |
| 2010 | Journal | Shiferaw, Dereje; Adama, Ethiopia; Mitra, R; | Fuzzy Logic Tuned PID Controller for Stewart Platform Manipulator | 4th International Conference on Computer Applications in Electrical Engineering Recent Advances February 19?21, 2010 Vol. No. Page 31 | |
| 2009 | Journal | Singh, SS; Roy, D; Mitra, R; Rao, RV Subba; Dayal, RK; Raj, Baldev; Manna, I; | Studies on laser sintering of mechanically alloyed Al50Ti40Si10 composite | Materials Science and Engineering: A Vol. 501 No. 43862 Page 242-247 | Elsevier |
| 2009 | Journal | Roy, D; Singh, SS; Basu, B; Lojkowski, W; Mitra, R; Manna, I; | Studies on wear behavior of nano-intermetallic reinforced Al-base amorphous/nanocrystalline matrix in situ composite | Wear Vol. 266 No. 44176 Page 1113-1118 | Elsevier |
| 2009 | Journal | Mishra, Sarika; Mitra, R; Vijayakumar, M; | Structure and properties of short fibre reinforced silica matrix composite foams | Ceramics International Vol. 35 No. 8 Page 3111-3116 | Elsevier |
| 2009 | Journal | Mishra, Sarika; Mitra, R; Vijayakumar, M; | Processing and microstructure of particle stabilized silica foams | Materials Letters Vol. 63 No. 30 Page 2649-2651 | Elsevier |
| 2009 | Journal | Sarkar, S; Sekharan, VG; Mitra, R; Roy, Manish; | The solid particle erosion behavior of carbon/carbon and carbon/phenolic composite used in re-entry vehicles | Tribology transactions Vol. 52 No. 6 Page 777-787 | Taylor & Francis Group |
| 2009 | Journal | Paswan, Sharma; Mitra, R; Roy, SK; | Nonisothermal and Cyclic Oxidation Behavior of Mo-Si-B and Mo-Si-B-Al Alloys | Metallurgical and materials transactions A Vol. 40 No. 11 Page 2644 | Springer US |
| 2009 | Journal | Roy, D; Singh, SS; Mitra, R; Rosinski, M; Michalski, A; Lojkowski, W; Manna, I; | Synthesis and characterization of precipitation hardened amorphous matrix composite by mechanical alloying and pulse plasma sintering of Al65Cu20Ti15 | Philosophical Magazine Vol. 89 No. 12 Page 1051-1061 | Taylor & Francis Group |
| 2009 | Journal | Pal, Sharmilee; Bhanuprasad, VV; Mitra, R; Ray, KK; | Effect of Thermal Cycling on Creep Behavior of Powder-Metallurgy-Processed and Hot-Rolled Al and Al-SiC Particulate Composites | Metallurgical and Materials Transactions A Vol. 40 No. 13 Page 3171 | Springer US |
| 2009 | Journal | Mitra, R; Chattopadhyay, K; Srivastava, Arvind K; Ray, Kalyan Kumar; Eswara Prasad, N; | Effect of ductile and brittle phases on deformation and fracture behaviour of molybdenum and niobium silicide based composites | Key Engineering Materials Vol. 395 No. Page 179-192 | Trans Tech Publications Ltd |
| 2009 | Journal | Siddhalingeshwar, IG; Behera, A; Mitra, R; Chakraborty, M; | Microstructural evolution and hardness of in situ Al-4.5 Cu-5TiB 2 composite processed by multiple roll passes in mushy state | Transactions of the Indian Institute of Metals Vol. 62 No. 43955 Page 379-382 | Springer-Verlag |
| 2009 | Journal | Mitra, R; Chattopadhyay, K; Srivastava, Arvind K; Ray, Kalyan Kumar; Eswara Prasad, N; | Effect of ductile and brittle phases on deformation and fracture behaviour of molybdenum and niobium silicide based composites | Key Engineering Materials Vol. 395 No. Page 179-192 | Trans Tech Publications Ltd |
| 2009 | Journal | Mitra, R; Upender, Sunkari; Mallik, Manab; Chakraborty, Subrata; Ray, Kalyan Kumar; | Mechanical, thermal and oxidation behaviour of zirconium diboride based ultra-high temperature ceramic composites | Key Engineering Materials Vol. 395 No. Page 55-68 | Trans Tech Publications Ltd |
| 2009 | Journal | Mitra, R; Siddhalingeshwar, IG; Chakraborty, M; Behera, A; | Microstructural evolution and hardness of in situ Al-4.5 Cu-5TiB2 composite processed by multiple roll passes in mushy state | Vol. No. Page | |
| 2008 | Journal | Herbert, Mervin A; Maiti, R; Mitra, R; Chakraborty, M; | Wear behaviour of cast and mushy state rolled Al?4.5 Cu alloy and in-situ Al4. 5Cu?5TiB2 composite | Wear Vol. 265 No. 44176 Page 1606-1618 | Elsevier |
| 2008 | Journal | Roy, D; Mitra, R; Chudoba, T; Witczak, Z; Lojkowski, W; Fecht, H-J; Manna, I; | Structure and mechanical properties of Al65Cu20Ti15-based amorphous/nanocrystalline alloys prepared by high-pressure sintering | Materials Science and Engineering: A Vol. 497 No. 43862 Page 93-100 | Elsevier |
| 2008 | Journal | Roy, D; Chakravarty, D; Mitra, R; Manna, I; | Effect of sintering on microstructure and mechanical properties of nano-TiO2 dispersed Al65Cu20Ti15 amorphous/nanocrystalline matrix composite | Journal of alloys and compounds Vol. 460 No. 43862 Page 320-325 | Elsevier |
| 2008 | Journal | Chattopadhyay, K; Mitra, R; Ray, KK; | Nonisothermal and isothermal oxidation behavior of Nb-Si-Mo alloys | Metallurgical and Materials Transactions A Vol. 39 No. 3 Page 577-592 | Springer US |
| 2008 | Journal | Pal, Sharmilee; Mitra, Rahul; Bhanuprasad, VV; | Aging behaviour of Al?Cu?Mg alloy?SiC composites | Materials Science and Engineering: A Vol. 480 No. 43862 Page 496-505 | Elsevier |
| 2008 | Journal | Pal, Sharmilee; Bhanuprasad, VV; Mitra, R; | Damage evaluation in discontinuously reinforced aluminum matrix composites subjected to thermal cycling | Materials Science and Engineering: A Vol. 489 No. 43862 Page 44155 | Elsevier |
| 2008 | Journal | Mishra, Sarika; Mitra, R; Vijayakumar, M; | Light weight silica tiles through foam casting method | Journal of the European Ceramic Society Vol. 28 No. 9 Page 1769-1776 | Elsevier |
| 2008 | Journal | Mitra, R; Upender, Sunkari; Mallik, Manab; Chakraborty, Subrata; Ray, KK; | Mechanical, thermal and oxidation behaviour of zirconium diboride based ultra-high temperature ceramic composites | Key Engineering Materials Vol. 758 No. 395 Page 55 | |
| 2008 | Journal | Mishra, Sarika; Mitra, R; Vijayakumar, M; | A novel route for the dispersion of fibers for the preparation of fiber reinforced porous composites | Materials Letters Vol. 62 No. 44178 Page 2025-2028 | North-Holland |
| 2008 | Journal | Roy, D; Mitra, R; Fedyk, R; Witczak, Z; Lojkowski, W; Manna, I; | Synthesis and characterization of in situ nanocrystalline intermetallic phase reinforced AlTiSi amorphous matrix composite | Philosophical Magazine Vol. 88 No. 24 Page 3031-3041 | Taylor & Francis |
| 2008 | Journal | Mitra, R; Prasad, N Eswara; Mahajan, YR; | Mechanical behaviour of Ti 5 Si 3 based alloys and composites | Transactions of the Indian Institute of Metals Vol. 61 No. 5 Page 427-433 | Springer-Verlag |
| 2008 | Journal | Ahn, Byung; Mitra, R; Hodge, AM; Lavernia, Enrique J; Nutt, SR; | Strain rate sensitivity studies of cryomilled Al alloy performed by nanoindentation | Materials Science Forum Vol. 584 No. Page 221-226 | Trans Tech Publications Ltd |
| 2008 | Journal | Roy, D; Mitra, R; Chudoba, T; Witczak, Z; Lojkowski, W; Fecht, HJ; Manna, I; | Bulk Metal Nanostructures-The Mechanical Properties of Nano-TiO2 Dispersed Al65Cu20Ti15 Amorphous/Nanocrystalline Matrix Bulk Composite Prepared by Mechanical Alloying and High Pressure Sintering | Solid State Phenomena Vol. 140 No. Page 161 | |
| 2008 | Journal | Roy, Debdas; Mitra, R; Chudoba, Tadeusz; Witczak, Zbigniew; ?ojkowski, Witold; Fecht, Hans Jorg; Manna, I; | The Mechanical Properties of Nano-TiO2 Dispersed Al65Cu20Ti15 Amorphous/Nanocrystalline Matrix Bulk Composite Prepared by Mechanical Alloying and High Pressure Sintering | Solid State Phenomena Vol. 140 No. Page 161-166 | Trans Tech Publications Ltd |
| 2008 | Journal | Mitra, R; Upender, Sunkari; Mallik, Manab; Chakraborty, Subrata; Ray, KK; | Mechanical, thermal and oxidation behaviour of zirconium diboride based ultra-high temperature ceramic composites | Key Engineering Materials Vol. 758 No. 395 Page 55 | |
| 2008 | Journal | Roy, Debdas; Mitra, R; Chudoba, Tadeusz; Witczak, Zbigniew; ?ojkowski, Witold; Fecht, Hans Jorg; Manna, I; | The Mechanical Properties of Nano-TiO2 Dispersed Al65Cu20Ti15 Amorphous/Nanocrystalline Matrix Bulk Composite Prepared by Mechanical Alloying and High Pressure Sintering | Solid State Phenomena Vol. 140 No. Page 161-166 | Trans Tech Publications Ltd |
| 2008 | Journal | Das, NC; Sarkar, S; Mitra, R; | Asymptotic Limits Of The Frequency Of Vibrations Of A Generalized Thermoelastic Infinite Plate | Vibration Problems ICOVP-2007 Vol. No. Page 77-89 | Springer, Dordrecht |
| 2008 | Journal | Roy, D; Mitra, R; Fedyk, R; Witczak, Z; Lojkowski, W; Manna, I; | Synthesis and characterization ofin situnanocrystalline intermetallic phase reinforced AlTiSi amorphous matrix composite | Vol. No. Page | |
| 2008 | Journal | Roy, Debdas; Mitra, R; Chudoba, Tadeusz; Witczak, Zbigniew; ? ojkowski, Witold; Fecht, Hans J; Manna, I; | The Mechanical Properties of Nano-TiO 2 Dispersed Al 65 Cu 20 Ti 15 Amorphous/Nanocrystalline Matrix Bulk Composite Prepared by Mechanical Alloying and High Pressure Sintering | Solid State Phenomena Vol. 738 No. 140 Page 161 | |
| 2008 | Journal | Sintering, High Pressure; Roy, D; Mitra, R; Chudoba, T; Witczak, Z; Lojkowski, W; | Amorphous/nanocrystalline The Mechanical Properties of Matrix Nano-TiO Bulk 2 Composite Dispersed Prepared Al6520Ti by | Perspectives of nanoscience and nanotechnology Vol. 140 No. Page 161-166 | Trans Tech Publications Ltd |
| 2007 | Journal | Microstructural Evolution, Hardness and Alligatoring in the Mushy State Rolled Cast Al-4.5Cu Alloy and In-situ Al4.5Cu-5TiB2 Composite by Mervin A. Herbert, Chandan Sarkar, R. Mitra and M. Chakraborty Metallurgical and Materials Transactions A. 38(9) 2110 |
| 2007 | Journal | Oxidation Behaviour of the Mo-Si-B and Mo-Si-B-Al Alloys in the Temperature Range of 700-1300oC by Sharma Paswan, R. Mitra and S.K. Roy Intermetallics 15 1217-1227 (2007) |
| 2007 | Journal | Paswan, Sharma; Mitra, R; Roy, SK; | Oxidation behaviour of the Mo?Si?B and Mo?Si?B?Al alloys in the temperature range of 700?1300ø C | Intermetallics Vol. 15 No. 9 Page 1217-1227 | Elsevier |
| 2007 | Journal | Roy, D; Kumari, S; Mitra, R; Manna, I; | Microstructure and mechanical properties of mechanically alloyed and spark plasma sintered amorphous?nanocrystalline Al65Cu20Ti15 intermetallic matrix composite reinforced with TiO2 nanoparticles | Intermetallics Vol. 15 No. 12 Page 1595-1605 | Elsevier |
| 2007 | Journal | Chattopadhyay, K; Sinha, R; Mitra, R; Ray, KK; | Effect of Mo and Si on morphology and volume fraction of eutectic in Nb?Si?Mo alloys | Materials Science and Engineering: A Vol. 456 No. 43862 Page 358-363 | Elsevier |
| 2007 | Journal | Herbert, Mervin A; Sarkar, Chandan; Mitra, R; Chakraborty, M; | Microstructural evolution, hardness, and alligatoring in the mushy state rolled cast Al-4.5 Cu alloy and In-Situ Al4. 5Cu-5TiB 2 Composite | Metallurgical and Materials Transactions A Vol. 38 No. 9 Page 2110-2126 | Springer US |
| 2007 | Journal | Sarkar, Sourav; Sekharan, VG; Mitra, Rahul; | 4D carbon-carbon composite processing and its properties in comparison with other carbon-carbon preforms | Transactions of the Indian Ceramic Society Vol. 66 No. 3 Page 141-145 | Taylor & Francis |
| 2007 | Journal | Herbert, Mervin A; Maiti, R; Mitra, R; Chakraborty, M; | Wear Behaviour and Microstructural Evolution in Cast and Hot-rolled Al-4.5 Cu-5TiB | Trans. Indian Inst. Met Vol. 60 No. 43892 Page 235-240 | |
| 2006 | Journal | Mechanical Behavior and Oxidation Resistance of Structural Silicides by R. Mitra International Materials Review 51(1) 13-64 (2006) |
| 2006 | Journal | Microstructure and Mechanical Behaviour of Reaction Hot Pressed Multiphase Mo-Si-B and Mo-Si-B-Al Intermetallic Alloys by R. Mitra, A.K. Srivastava, N. Eswara Prasad, and Sweety Kumari Intermetallics 14(12) 1461-1471 (2006) |
| 2006 | Journal | Mitra, R; | Mechanical behaviour and oxidation resistance of structural silicides | International Materials Reviews Vol. 51 No. 1 Page 13-64 | Taylor & Francis |
| 2006 | Journal | Mitra, R; Srivastava, AK; Prasad, N Eswara; Kumari, Sweety; | Microstructure and mechanical behaviour of reaction hot pressed multiphase Mo?Si?B and Mo?Si?B?Al intermetallic alloys | Intermetallics Vol. 14 No. 12 Page 1461-1471 | Elsevier |
| 2006 | Journal | Paswan, Sharma; Mitra, R; Roy, SK; | Isothermal oxidation behaviour of Mo?Si?B and Mo?Si?B?Al alloys in the temperature range of 400?800ø C | Materials Science and Engineering: A Vol. 424 No. 43862 Page 251-265 | Elsevier |
| 2006 | Journal | Chattopadhyay, K; Balachandran, G; Mitra, R; Ray, KK; | Effect of Mo on microstructure and mechanical behaviour of as-cast Nbss?Nb5Si3 in situ composites | Intermetallics Vol. 14 No. 12 Page 1452-1460 | Elsevier |
| 2006 | Journal | Herbert, Mervin A; Maiti, Rabin; Mitra, R; Chakraborty, M; | Microstructural Evolution and Wear Properties of In Situ Al-4.5 Cu-5TiB2 Composite Processed in Mushy State | Solid State Phenomena Vol. 116 No. Page 217-220 | Trans Tech Publications Ltd |
| 2006 | Journal | Mitra, R; Srivastava, AK; Eswara Prasad, N; Kumari, Sweety; | Microstructure and mechanical behaviour of reaction hot pressed multiphase Mo# 8211Si# 8211B and Mo# 8211Si# 8211B# 8211Al intermetallic alloys | Intermetallics Vol. 14 No. 12 Page 1461-1471 | Barking, Essex, England: Elsevier Applied Science, 1993- |
| 2006 | Journal | Herbert, Mervin A; Maiti, Rabin; Mitra, R; Chakraborty, M; | Microstructural Evolution and Wear Properties of In Situ Al-4.5 Cu-5TiB2 Composite Processed in Mushy State | Solid State Phenomena Vol. 116 No. Page 217-220 | Trans Tech Publications Ltd |
| 2005 | Journal | Mitra, R; Ungar, T; Weertman, JR; | Comparison of grain size measurements by x-ray diffraction and transmission electron microscopy methods | T. Indian Inst. Metals Vol. 58 No. Page 1125 | |
| 2005 | Journal | Chattopadhyay, K; Singhal, A; Mitra, R; Balachandran, G; Ray, KK; | MECHANICAL BEHAVIOUR OF Nb-Si-Mo ALLOYS | Transactions of the Indian Institute of Metals Vol. 58 No. 5 Page | |
| 2005 | Journal | Pal, Sharmilee; Maiti, R; Mitra, R; Bhanuprasad, VV; | INTEGRITY OF INTERFACES IN P/M Al ALLOY-SiC AND IN-SITU Al-TiC COMPOSITES SUBJECTED TO HEAT TREATMENT AND THERMAL CYCLING | Transactions of the Indian Institute of Metals Vol. 58 No. 5 Page | |
| 2005 | Journal | Sarkar, Chandan; Herbert, Mervin A; Mitra, R; Chakraborty, M; | MICROSTRUCTURAL EVOLUTION AND ALLIGATORING DURING MUSHY STATE ROLLING OF Al-4. 5 Cu ALLOY AND Al 4. 5 Cu-5 TiB 2 COMPOSITE | Transactions of the Indian Institute of Metals Vol. 58 No. 5 Page | |
| 2005 | Journal | Ataullakhanov, FI; Back, JW; Beckering, CL; Belles, X; Bingham, RJ; Bisseret, P; Brabec, V; Buttigliero, LV; Chatterjee, A; Chugh, J; | Agius L, 336 Altabe SG, 271 Ananyeva NM, 374 | Vol. No. Page | |
| 2004 | Journal | In-Situ Study of Deformation Mechanisms in Sputtered Free-Standing Nanocrystalline Nickel Films by R. Mitra, W. A. Chiou and J. R. Weertman Journal of Materials Research 19(4) 1029-1037 (2004) |
| 2004 | Journal | Mitra, R; Rao, VS Chalapathi; Maiti, R; Chakraborty, M; | Stability and response to rolling of the interfaces in cast Al?SiCp and Al?Mg alloy-SiCp composites | Materials science and Engineering: A Vol. 379 No. 43862 Page 391-400 | Elsevier |
| 2004 | Journal | Mitra, R; Chiou, A; Weertman, JR; | In situ study of deformation mechanisms in sputtered free-standing nanocrystalline nickel films | Journal of materials research Vol. 19 No. 4 Page 1029-1037 | Cambridge University Press |
| 2004 | Journal | Morita, Tatsuro; Mitra, Rahul; Weertman, Julia R; | Micromechanics model concerning yield behavior of nanocrystalline materials | Materials transactions Vol. 45 No. 2 Page 502-508 | The Japan Institute of Metals and Materials |
| 2004 | Journal | Mitra, R; Khanna, Rohit; Rao, VV Rama; | Microstructure, mechanical properties and oxidation behavior of a multiphase (Mo, Cr)(Si, Al) 2 intermetallic alloy?SiC composite processed by reaction hot pressing | Materials Science and Engineering: A Vol. 382 No. 43862 Page 150-161 | Elsevier |
| 2004 | Journal | Mitra, R; Sadananda, K; Feng, CR; | Effect of microstructural parameters and Al alloying on creep behavior, threshold stress and activation volumes of molybdenum disilicides | Intermetallics Vol. 12 No. 44081 Page 827-836 | Elsevier |
| 2004 | Journal | Srivastava, AK; Raje, S; Kumari, Sweety; Prasad, N Eswara; Mitra, R; | MICROSTRUCTURE AND MECHANICAL BEHAVIOUR OF MULTIPHASE Mo-Si-B ALLOYS | Transactions of the Indian Institute of Metals Vol. 57 No. 5 Page | |
| 2004 | Journal | Chattopadhyay, K; Balachandran, G; Mitra, R; Ray, KK; | EFFECT OF Mo ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Nb-Si-Mo ALLOYS | Transactions of the Indian Institute of Metals Vol. 57 No. 5 Page | |
| 2004 | Journal | Morita, Tatsuro; Mitra, Rahul; Weertman, Julia R; | Micromechanics of Defects in Solids Micromechanics of Defects in Solids 178-187, 205-218, 1987 | Materials transactions Vol. 45 No. 2 Page 502-508 | |
| 2004 | Journal | Morita, Tatsuro; Mitra, Rahul; Weertman, Julia R; | Nanostructed Mater. Nanostructed Mater. 2, 323-331, 1993 | Materials transactions Vol. 45 No. 2 Page 502-508 | |
| 2003 | Journal | Hugo, RC; Kung, H; Weertman, JR; Mitra, R; Knapp, JA; Follstaedt, DM; | In-situ TEM tensile testing of DC magnetron sputtered and pulsed laser deposited Ni thin films | Acta Materialia Vol. 51 No. 7 Page 1937-1943 | Elsevier |
| 2003 | Journal | Mitra, R; Prasad, N Eswara; Kumari, Sweety; Rao, A Venugopal; | High-temperature deformation behavior of coarse-and fine-grained MoSi 2 with different silica contents | Metallurgical and Materials Transactions A Vol. 34 No. 5 Page 1069-1088 | Springer-Verlag |
| 2003 | Journal | Rao, VSC; Mitra, R; Chakraborty, M; | Chemical reaction control and deformation response at the interfaces in cast Al-SiCP composites. | Transactions of the Indian Institute of Metals Vol. No. Page | |
| 2002 | Journal | Gai, Pratibha L; Mitra, Rahul; Weertman, Julia R; | Structural variations in nanocrystalline nickel films | Pure and Applied Chemistry Vol. 74 No. 9 Page 1519-1526 | De Gruyter |
| 2002 | Journal | Mitra, R; Prasad, NE; Kumari, S; Rao, AV; Sadananda, K; | High temperature mechanical properties of MoSi 2 based materials. | ICAMMP-2002: International Conference on Advances in Materials Processing Vol. No. Page 316-320 | |
| 2002 | Journal | Mitra, R; Prasad, N Eswara; | Room Temperature Mechanical Behaviour of MoSi2 Based Laminated Composites | Transactions of the Indian Ceramic Society Vol. 61 No. 2 Page 60-68 | Taylor & Francis |
| 2001 | Journal | Mitra, R; Hoffman, RA; Madan, A; Weertman, JR; | Effect of process variables on the structure, residual stress, and hardness of sputtered nanocrystalline nickel films | Journal of Materials Research Vol. 16 No. 4 Page 1010-1027 | Cambridge University Press |
| 2001 | Journal | Mitra, R; Rao, A Venugopal; | Effect of Processing Methods on Purity, Structure of Interfaces and High Temperature Strength of MoSi2 and MoSi2-SiC Composites | Transactions of the Indian Ceramic Society Vol. 60 No. 1 Page 44185 | Taylor & Francis |
| 2001 | Journal | Mitra, R; Madan, A; Hoffman, RA; Chiou, W-A; Weertman, JR; | Effect of annealing on microstructure, residual stress, and hardness of Al?Ti multilayered films | Journal of Materials Research Vol. 16 No. 7 Page 2064-2076 | Cambridge University Press |
| 2001 | Journal | Chakraborty, A; Mitra, R; Kamat, SV; Ray, KK; | STRUCTURE-PROPERTY BEHAVIOUR OF Al2O3-SiC COMPOSITES FABRICATED BY POWDER PROCESSING ROUTE | TRANSACTIONS-POWDER METALLURGY ASSOCIATION OF INDIA HYDERABAD Vol. 27 No. Page 64 | |
| 2001 | Journal | Chakraborty, A; Mitra, R; Kamat, SV; Ray, KK; Bhaduri, SB; | Effect of SiC morphologies on the structure property behaviour of Al sub 2 O sub 3-SiC composites | Ceramic Transactions(USA) Vol. 124 No. Page 97-114 | |
| 2001 | Journal | Mitra, R; Hoffman, RA; Madan, A; Weertman, JR; | Volume 16, Number 4, April 2001-ARTICLES-Effect of process variables on the structure, residual stress, and hardness of sputtered nanocrystalline nickel films | Journal of Materials Research Vol. 16 No. 4 Page 1010-1027 | Pittsburgh, PA: Published for the Materials Research Society by the Americanÿ? |
| 2000 | Journal | Chakraborty, A; Kamat, SV; Mitra, R; Ray, KK; | Effect of MoSi2 and Nb reinforcements on mechanical properties of Al2O3 matrix composites | Journal of materials science Vol. 35 No. 15 Page 3827-3835 | Kluwer Academic Publishers |
| 2000 | Journal | Chiou, W-A; Mitra, R; | In situ TEM study of straining of free standing nickel thin films | Microscopy and Microanalysis Vol. 6 No. S2 Page 464-465 | Cambridge University Press |
| 2000 | Journal | Mitra, R; Chiou, W-A; Rao, A Venugopal; | Grain Boundaries and Interfaces in MoSi 2 and MoSi 2-SiC Composites and Their Effect on High Temperature Strength | Microscopy and Microanalysis Vol. 6 No. S2 Page 424-425 | Cambridge University Press |
| 2000 | Journal | Chakraborty, A; Kamat, SV; Mitra, R; Ray, KK; | info: doi/10.1023/A: 1004877329895 2012-12-27 JJ: 10.1007 J: 10.1007: 3028 Journal of Materials Science002224613515A. ChakrabortyS. V. KamatR. MitraK. K. Ray20003827383526993110. 1023/A: 100487732989520021221012544http://link. springer. com/10.1023/A: 1004877329895 | Journal of Materials Science Vol. 35 No. Page 3827-3835 | |
| 1999 | Journal | Weertman, JR; Farkas, D; Hemker, K; Kung, H; Mayo, M; Mitra, R; Van Swygenhoven, HMRS; | Structure and mechanical behavior of bulk nanocrystalline materials | Mrs Bulletin Vol. 24 No. 2 Page 44-53 | Cambridge University Press |
| 1999 | Journal | Sadananda, K; Feng, CR; Mitra, R; Deevi, SC; | Creep and fatigue properties of high temperature silicides and their composites | Materials Science and Engineering: A Vol. 261 No. 43862 Page 223-238 | Elsevier |
| 1999 | Journal | Mitra, R; Rao, VV Rama; | Effect of minor alloying with Al on oxidation behaviour of MoSi2 at 1200ø C | Materials Science and Engineering: A Vol. 260 No. 43862 Page 146-160 | Elsevier |
| 1999 | Journal | Mitra, R; Rao, VV Rama; Rao, A Venugopal; | Effect of small aluminum additions on microstructure and mechanical properties of molybdenum di-silicide | Intermetallics Vol. 7 No. 2 Page 213-232 | Elsevier |
| 1999 | Journal | Mitra, R; Madan, A; Hoffman, RA; Chiou, WA; Weertman, JR; | Effect of annealing on microstructure and properties of Al-Ti Multilayered films | MRS Online Proceedings Library Archive Vol. 594 No. Page | Cambridge University Press |
| 1999 | Journal | Mitra, R; Chiou, WA; Weertman, JR; Hoffman, R; | TEM Study Of Nanocrystalline Ni Films Grown By DC Magnetron Sputtering | Microscopy and Microanalysis Vol. 5 No. S2 Page 834-835 | Cambridge University Press |
| 1999 | Journal | Mitra, R; Chiou, WA; Madan, A; Hoffman, R; Weertman, JR; | Microstructural Evolution In Al-Ti Multilayered Film With Annealing | Microscopy and Microanalysis Vol. 5 No. S2 Page 836-837 | Cambridge University Press |
| 1999 | Journal | Mitra, R; Ungar, T; Morita, T; Sanders, PG; Weertman, JR; | Assessment of grain size distributions in nanocrystalline copper and their effect on mechanical behavior | Vol. No. Page | Northwestern Univ., Evanston, IL (US) |
| 1999 | Journal | Morita, Tatsuro; Mitra, Rahul; Weertman, Julia R; | Proceedings of TMS Fall Meeting, 1999 Proceedings of TMS Fall Meeting, 1999, 553-564, 1999 | Proceedings of TMS Fall Meeting Vol. 1999 No. Page 553-564 | |
| 1999 | Journal | Mitra, R; Rama Rao, VV; | Effect of minor alloying with Al on oxidation behaviour of MoSi {sub 2} at 1200 C | Vol. No. Page | |
| 1998 | Journal | Mitra, R; | Microstructure and mechanical behavior of reaction hot-pressed titanium silicide and titanium silicide-based alloys and composites | Metallurgical and Materials Transactions A Vol. 29 No. 6 Page 1629-1641 | Springer-Verlag |
| 1998 | Journal | Mitra, R; Rao, VV Rama; | Elevated-temperature oxidation behavior of titanium silicide and titanium silicide-based alloy and composite | Metallurgical and Materials Transactions A Vol. 29 No. 6 Page 1665-1675 | Springer-Verlag |
| 1997 | Journal | Mitra, R; Mahajan, YR; Prasad, N Eswara; Chiou, WA; | Processing?microstructure?property relationships in reaction hot-pressed MoSi2 and MoSi2/SiCp composites | Materials Science and Engineering: A Vol. 225 No. 43862 Page 105-117 | Elsevier |
| 1997 | Journal | Mitra, R; Rao, VV Rama; Mahajan, YR; | Oxidation behaviour of reaction hot pressed MoSi2?SiC composites at 500ø C | Materials science and technology Vol. 13 No. 5 Page 415-419 | Taylor & Francis |
| 1997 | Journal | Mitra, R; Prasad, N Eswara; Mahajan, YR; | REACTION hot pressed silicides and silicide matrix composites: processing, microstructure and properties | Transactions of the Indian Ceramic Society Vol. 56 No. 3 Page 71-78 | Taylor & Francis |
| 1995 | Journal | Mitra, R; Mahajan, YR; | Interfaces in discontinuously reinforced metal matrix composites: an overview | Bulletin of Materials Science Vol. 18 No. 4 Page 405-434 | Springer India |
| 1995 | Journal | Mitra, R; Mahajan, YR; Eswara Prasad, N; Chiou, WA; Ganguly, C; | Reaction hot pressing and characterization of MoSi2/SiCp composites | Key Engineering Materials Vol. 108 No. Page 44153 | Trans Tech Publications Ltd |
| 1995 | Journal | Ray, KK; Mitra, R; Bhaduri, A; | A study of the crack path in flake graphite cast iron using profilometric analysis | Cast Metals Vol. 8 No. 2 Page 65-71 | Taylor & Francis |
| 1995 | Journal | Mitra, R; Fine, ME; Weertman, JR; | EFFECT OF DEFORMATION AND RECRYSTALLlZATION ON MlCROSTRUCTURE AND lNTERFACES lN XD AI/T1C METAL MATRlX COMPOSITES | Mechanical Properties and Phase Transformations of Multiphase Intermetallic Alloys: Proceedings of a Symposium Sponsored by the TMS-SMD Physical Metallurgy Committee at the'94 TMS Fall Meeting in Rosemont, Illinois, October 2-6, 1994 Vol. No. Page 199 | Tms |
| 1994 | Journal | Xu, ZR; Chawla, KK; Mitra, R; Fine, ME; | Effect of particle size on the thermal expansion of Tic/A1 XDTM Composites | Scr. Metall. Mater Vol. 31 No. Page 1525-1530 | |
| 1994 | Journal | Xu, ZR; Chawla, KK; Mitra, R; Fine, ME; | Effect of particle size on the thermal expansion of Tic/A1 XDTM Composites | Scr. Metall. Mater Vol. 31 No. Page 1525-1530 | |
| 1994 | Journal | Mitra, R; | Microstructure and interfaces in XD aluminum/titanium carbide metal matrix composites. | Vol. No. Page | |
| 1993 | Journal | Mitra, R; Chiou, WA; Fine, ME; Weertman, JR; | Interfaces in as-extruded XD Al/TiC and Al/TiB 2 metal matrix composites | Journal of materials research Vol. 8 No. 9 Page 2380-2392 | Cambridge University Press |
| 1993 | Journal | Mitra, R; Fine, ME; Weertman, JR; | Chemical reaction strengthening of Al/TiC metal matrix composites by isothermal heat treatment at 913 K | Journal of materials research Vol. 8 No. 9 Page 2370-2379 | Cambridge University Press |
| 1993 | Journal | Mitra, Rahul; Mahajan, Yashwant R; | Interfaces in Discontinuously Reinforced Metal Matrix Composites | Defence Science Journal Vol. 43 No. 4 Page 397 | Defence Scientific Information & Documentation Centre |
| 1993 | Journal | Fine, Morris E; Mitra, Rahul; Weertman, Julia R; | Interfaces in Al-TiC composites prepared by in-situ processing | Zeitschrift f?r Metallkunde Vol. 84 No. 4 Page 282-285 | |
| 1993 | Journal | Fine, ME; Mitra, R; Chawla, KK; | Internal stress and work of adhesion | Scripta metallurgica et materialia Vol. 29 No. 2 Page 221-223 | Pergamon |
| 1993 | Journal | Mitra, Rahul; | Microstructure and Interfaces in XD Al/TiC Metal Matrix Composites | Vol. No. Page | Northwestern University |
| 1993 | Journal | Fine, ME; Weertman, JR; Mitra, R; Chiou, WA; | Interfaces in As-Extruded XD Al/TiC and Al/TiB2 Metal Matrix Composites | Vol. No. Page | NORTHWESTERN UNIV EVANSTON IL DEPT OF MATERIALS SCIENCE AND ENGINEERING |
| 1992 | Journal | Mitra, R; Weertman, JR; Fine, ME; Aikin, RM; | Modification of microstructure and mechanical properties of XD Al/TiC composites by 913 K exposure | Developments in Ceramic and Metal-Matrix Composites. Proc. Symp. San Diego Vol. 1 No. 5 Page | |
| 1992 | Journal | Mitra, R; Weertman, JR; Fine, ME; Aikin, RM; | Modification of microstructure and mechanical properties of XD Al/TiC composites by 913 K exposure | Developments in Ceramic and Metal-Matrix Composites. Proc. Symp. San Diego Vol. 1 No. 5 Page | |
| 1992 | Journal | Fine, ME; Weertman, JR; Aikin, RM; Mitra, R; Chiou, WA; | Study of Interfaces in XDTM al/TiCp Metal Matrix Composites | Vol. No. Page | NORTHWESTERN UNIV EVANSTON IL DEPT OF MATERIALS SCIENCE AND ENGINEERING |
| 1992 | Journal | Mitra, R; Chiou, W; | Interfaces in XD Al/TiC sub/ p/ metal matrix composites | Materials Research Society Symposium Proceedings, 238 pp. Vol. 871 No. Page | |
| 1992 | Journal | Fine, ME; Weertman, JR; Aikin, RM; Mitra, R; | Modification of Microstructure and Mechanical Properties of XDtm Al/TiC Composites by 913 K Exposure | Vol. No. Page | NORTHWESTERN UNIV EVANSTON IL DEPT OF MATERIALS SCIENCE AND ENGINEERING |
| 1991 | Journal | Mitra, R; Chiou, WA; Weertman, JR; Fine, ME; Aikin Jr, RM; | Relaxation mechanisms at the interfaces in XD? Al/TiCp metal matrix composites | Scripta metallurgica et materialia Vol. 25 No. 12 Page 2689-2694 | Pergamon |
| 1991 | Journal | Mitra, R; Chiou, WA; Weertman, JR; Fine, ME; Aikin, RM; | Study Of Interfaces In XD TM Al/TiC p Metal Matrix Composites | MRS Online Proceedings Library Archive Vol. 238 No. Page | Cambridge University Press |
| 1991 | Journal | Mitra, R; Chiou, W; | Study of Interfaces in XD Al/TiC sub p Metal Matrix Composites | Structure and Properties of Interfaces in Materials Vol. No. Page 871-876 | |
| 1990 | Journal | Mitra, Rahul; | Study of Interface in Al/TiC Metal Matrix Composites. | Vol. No. Page | NORTHWESTERN UNIV EVANSTON IL DEPT OF MATERIALS SCIENCE AND ENGINEERING |
| 1976 | Journal | LAL, M; MITRA, R; | SIMPLIFICATION OF LARGE SYSTEM DYNAMICS USING A MOMENTS EVALUATION ALGORITHM-REPLY | IEEE TRANSACTIONS ON AUTOMATIC CONTROL Vol. 21 No. 4 Page 632-632 | IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC 345 E 47TH ST, NEW YORK, NYÿ? |
| 1963 | Journal | Morita, Tatsuro; Mitra, Rahul; Weertman, Julia R; | Trans. TMS-AIME Trans. TMS-AIME 227, 239-247, 1963 | Trans. TMS-AIME Vol. 227 No. Page 239-247 | |