2020 |
Journal |
Bhuyan, P; Reddy, KV; Pradhan, SK; Pal, Snehanshu; Mitra, R; Mandal, S; | A potential insight into the serration behaviour of ?3n (n? 3) boundaries in Alloy 617 | Materials Chemistry and Physics Vol. No. Page 122919 | Elsevier |
2020 |
Journal |
Duley, Partha; Sanyal, Souriddha; Bandyopadhyay, TK; Mandal, Sumantra; | Implications of grain size distribution, precipitate evolution and texture development on tensile properties in hard plate hot forged and annealed Mg–Zn–Ca–Mn alloy | Materials Science and Engineering: A Vol. No. Page 139288 | Elsevier |
2020 |
Journal |
Arun Babu, K; Athreya, CN; Mozumder, YH; Sarma, VS; Mandal, Sumantra; | A comprehensive study on texture development and twin-related domain evolution following hot compression in a super austenitic stainless steel | Metallurgical and Materials Transactions A Vol. No. Page | |
2020 |
Journal |
Mozumder, Yahya H; Babu, K Arun; Saha, Rajib; Sarma, V Subramanya; Mandal, Sumantra; | Dynamic microstructural evolution and recrystallization mechanism during hot deformation of intermetallic-hardened duplex lightweight steel | Materials Science and Engineering: A Vol. No. Page 139613 | Elsevier |
2020 |
Journal |
Kaithwas, CK; Bhuyan, P; Pradhan, SK; Mandal, Sumantra; | ‘Hall-Petch’type of relationship between the extent of intergranular corrosion and grain size in a Ni-based superalloy | Corrosion Science Vol. 175 No. Page 108868 | Pergamon |
2020 |
Journal |
Mozumder, YH; Arun Babu, K; Mandal, S; | Compressive Flow Behaviour and Deformation Instabilities of Fe-Mn-Al-Ni-C Lightweight Duplex Steel | Transactions of the Indian National Academy of Engineering Vol. No. Page | Springer |
2020 |
Journal |
Kaithwas, CK; Bhuyan, P; Mandal, Sumantra; | Assessing the potential of sparsely nucleated recrystallized grains to lead grain boundary engineering during extending annealing in Alloy 600H | Materials Characterization Vol. 168 No. Page 110538 | Elsevier |
2019 |
Journal |
Athreya, CN; Deepak, K; Kim, Dong-Ik; de Boer, B; Mandal, Sumantra; Sarma, V Subramanya; | Role of grain boundary engineered microstructure on high temperature steam oxidation behaviour of Ni based superalloy alloy 617 | Journal of Alloys and Compounds Vol. 778 No. Page 224-233 | Elsevier |
2019 |
Journal |
Duley, Partha; Sanyal, Souriddha; Bandyopadhyay, TK; Mandal, Sumantra; | Homogenization-induced age-hardening behavior and room temperature mechanical properties of Mg-4Zn-0.5 Ca-0.16 Mn (wt%) alloy | Materials & Design Vol. 164 No. Page 107554 | Elsevier |
2019 |
Journal |
Bhuyan, P; Pradhan, SK; Mitra, R; Mandal, S; | Evaluating the efficiency of grain boundary serrations in attenuating high-temperature hot corrosion degradation in Alloy 617 | Corrosion Science Vol. 149 No. Page 164-177 | Pergamon |
2019 |
Journal |
Sarkar, Arnab; Sanyal, Souriddha; Bandyopadhyay, TK; Mandal, Sumantra; | Recrystallization behaviour and tensile properties of Al-added medium-Mn-steel at different deformation-annealing conditions | Materials Science and Technology Vol. 35 No. 17 Page 2054-2068 | Taylor & Francis |
2019 |
Journal |
Sanyal, S; Kanodia, S; Saha, R; Bandyopadhyay, TK; Mandal, S; | Influence of hard plate hot forging temperature on the microstructure, texture and mechanical properties in a lean Mg–Zn–Al alloy | Journal of Alloys and Compounds Vol. 800 No. Page 343-354 | Elsevier |
2019 |
Journal |
Pradhan, S.K; Bhuyan, P; Mandal, S; | Influence of the individual microstructural features on pitting corrosion in type 304 austenitic stainless steel | Corrosion Science Vol. No. Page | Elsevier |
2019 |
Journal |
Arun Babu, K; Mozumder, Y.H; Saha, Rajib; Mandal, Sumantra; | A systematic assessment of various stability/instability criteria in predicting the hot deformation-related instabilities in super-304H stainless steels | Journal of Materials Engineering and Performance Vol. No. Page | |
2019 |
Journal |
Sarkar, Arnab; Sanyal, Souriddha; Bandyopadhyay, Tapas K; Mandal, Sumantra; | Implications of microstructure, Taylor factor distribution and texture on tensile properties in a Ti-added Fe-Mn-Al-Si-C steel | Materials Science and Engineering: A Vol. 767 No. Page 138402 | Elsevier |
2018 |
Journal |
Prasad, C; Bhuyan, P; Kaithwas, C; Saha, R; Mandal, S; | Microstructure engineering by dispersing nano-spheroid cementite in ultrafine-grained ferrite and its implications on strength-ductility relationship in high carbon steel | Materials & Design Vol. 139 No. Page 324-335 | Elsevier |
2018 |
Journal |
Prithiv, TS; Bhuyan, P; Pradhan, SK; Sarma, V Subramanya; Mandal, S; | A critical evaluation on efficacy of recrystallization vs. strain induced boundary migration in achieving grain boundary engineered microstructure in a Ni-base superalloy | Acta Materialia Vol. No. Page | Pergamon |
2018 |
Journal |
Pradhan, SK; Bhuyan, P; Kaithwas, C; Mandal, Sumantra; | Strain-annealing based grain boundary engineering to evaluate its sole implication on intergranular corrosion in extra-low carbon type 304L austenitic stainless steel | Metallurgical and Materials Transactions A Vol. 49 No. 7 Page 2817-2831 | Springer US |
2018 |
Journal |
Pradhan, SK; Bhuyan, P; Mandal, S; | Individual and synergistic influences of microstructural features on intergranular corrosion behavior in extra-low carbon type 304L austenitic stainless steel | Corrosion Science Vol. 139 No. Page 319-332 | Pergamon |
2018 |
Journal |
Roy, Swagata; Biswas, Srija; Arun Babu, K; Mandal, Sumantra; | Phenomenological Constitutive Modeling of High-Temperature Flow Behavior Incorporating Individual and Coupled Effects of Processing Parameters in Super-austenitic Stainless Steel | Journal of Materials Engineering and Performance Vol. No. Page 43841 | |
2018 |
Journal |
Kisku, Nicky; Sarkar, Arnab; Ray, KK; Mandal, Sumantra; | Development and Characterization of a Novel Ti-Modified High-Si Medium-Mn Steel Possessing Ultra-High Strength and Reasonable Ductility After Hot Rolling | Journal of Materials Engineering and Performance Vol. No. Page | Springer Link |
2018 |
Journal |
An, D; Griffiths, TA; Konijnenberg, P; Mandal, S; Wang, Z; Zaefferer, S; | Correlating the five parameter grain boundary character distribution and the intergranular corrosion behaviour of a stainless steel using 3D orientation microscopy based on mechanical polishing serial sectioning | Acta Materialia Vol. No. Page | Elsevier |
2018 |
Journal |
Babu, K Arun; Mozumder, Yahya H; Saha, R; Sarma, V Subramanya; Mandal, Sumantra; | Hot-workability of super-304H exhibiting continuous to discontinuous dynamic recrystallization transition | Materials Science and Engineering: A Vol. 734 No. Page 269-280 | Elsevier |
2018 |
Journal |
Dobe, Ritabrata; Bhuyan, Pallabi; Mandal, Sumantra; Gupta, Saibal; | Fluid percolation through quartz-rich lithologies: insight from the Coincident Site Lattice (CSL) Theory | EGUGA Vol. No. Page 348 | |
2018 |
Journal |
Kaithwas, CK; Bhuyan, P; Pradhan, SK; Mandal, Sumantra; | Microstructure evolution during low-strain thermo-mechanical processing and its repercussion on intergranular corrosion in alloy 600H | Materials Characterization Vol. 145 No. Page 582-593 | Elsevier |
2018 |
Journal |
Mozumder, Yahya H; Babu, K Arun; Saha, Rajib; Mandal, Sumantra; | Flow characteristics and hot workability studies of a Ni-containing Fe?Mn?Al?C lightweight duplex steel | Materials Characterization Vol. 146 No. Page 43844 | Elsevier |
2017 |
Journal |
Babu, K Arun; Mandal, S; Athreya, CN; Shakthipriya, B; Sarma, V Subramanya; | Hot deformation characteristics and processing map of a phosphorous modified super austenitic stainless steel | Materials & Design Vol. 115 No. Page 262-275 | Elsevier |
2017 |
Journal |
Goyal, Sunil; Mandal, S; Parameswaran, P; Sandhya, R; Athreya, CN; Laha, K; | A comparative assessment of fatigue deformation behavior of 316 LN SS at ambient and high temperature | Materials Science and Engineering: A Vol. 696 No. Page 407-415 | Elsevier |
2017 |
Journal |
Pradhan, SK; Mandal, S; Athreya, CN; Babu, K Arun; De Boer, B; Sarma, V Subramanya; | Influence of processing parameters on dynamic recrystallization and the associated annealing twin boundary evolution in a nickel base superalloy | Materials Science and Engineering: A Vol. 700 No. Page 49-58 | Elsevier |
2017 |
Journal |
Babu, K Arun; Mandal, Sumantra; | Regression based novel constitutive analyses to predict high temperature flow behavior in super austenitic stainless steel | Materials Science and Engineering: A Vol. 703 No. Page 187-195 | Elsevier |
2017 |
Journal |
Sarkar, Arnab; Sanyal, Souriddha; Bandyopadhyay, TK; Mandal, Sumantra; | Enhanced strength-ductility relationship in a medium Mn high Al-alloyed multicomponent steel through thermomechanical processing | Materials Science and Engineering: A Vol. 703 No. Page 205-213 | Elsevier |
2017 |
Journal |
Pradhan, SK; Prithiv, TS; Mandal, S; | Through-thickness microstructural evolution during grain boundary engineering type thermomechanical processing and its implication on sensitization behavior in austenitic stainless steel | Materials Characterization Vol. 134 No. Page 134-142 | Elsevier |
2017 |
Journal |
Sarkar, Arnab; Sanyal, Souriddha; Bandyopadhyay, TK; Mandal, Sumantra; | Influence of annealing parameters on phase evolution and recrystallization kinetics of a Mn-Al-Si alloyed duplex steel | Materials Characterization Vol. 134 No. Page 213-224 | Elsevier |
2016 |
Journal |
Deepak, K; Mandal, Sumantra; Athreya, CN; Kim, Dong-Ik; De Boer, B; | Implication of grain boundary engineering on high temperature hot corrosion of alloy 617 | Corrosion Science Vol. 106 No. Page 293-297 | Pergamon |
2016 |
Journal |
Pradhan, SK; Mandal, S; | Grain boundary character modification employing thermo-mechanical processing in type 304L stainless steel | IOP Conference Series. Materials Science and Engineering (Online) Vol. 115 No. 1 Page | |
2016 |
Journal |
Babu, K Arun; Mandal, Sumantra; Kumar, Abhishek; Athreya, CN; De Boer, B; Sarma, V Subramanya; | Characterization of hot deformation behavior of alloy 617 through kinetic analysis, dynamic material modeling and microstructural studies | Materials Science and Engineering: A Vol. 664 No. Page 177-187 | Elsevier |
2015 |
Journal |
Katnagallu, Shyam Swaroop; Mandal, Sumantra; Nagaraja, Athreya Cheekur; De Boer, Bernd; Vadlamani, Subramanya Sarma; | Role of carbide precipitates and process parameters on achieving grain boundary engineered microstructure in a Ni-based superalloy | Metallurgical and Materials Transactions A Vol. 46 No. 10 Page 4740-4754 | Springer US |
2015 |
Journal |
H. Zhang, K.G. Pradeep, S. Mandal, D. Ponge, H. Springer, D. Raabe; | Dynamic strain-induced transformation: An atomic scale investigation | Scripta Materialia Vol. 109 No. Page 23-27 | |
2014 |
Journal |
A novel approach to measure grain boundary segregation in bulk polycrystalline materials in dependence of the boundaries five rotational degrees of freedom, by Mandal S., Pradeep K. , Zaefferer S. , Raabe D. Scripta Materialia 81 16-19 (2014) |
2014 |
Journal |
Zhang, Han; Pradeep, Konda Gokuldoss; Mandal, Suvendu; Ponge, Dirk; Choi, P; Tasan, Cemal Cem; Raabe, Dierk; | Enhanced superplasticity in an Al-alloyed multicomponent Mn–Si–Cr–C steel | Acta materialia Vol. 63 No. Page 232-244 | Pergamon |
2014 |
Journal |
Samantaray, Dipti; Mandal, Sumantra; Jayalakshmi, M; Athreya, CN; Bhaduri, AK; Sarma, V Subramanya; | New insights into the relationship between dynamic softening phenomena and efficiency of hot working domains of a nitrogen enhanced 316L (N) stainless steel | Materials Science and Engineering: A Vol. 598 No. Page 368-375 | Elsevier |
2014 |
Journal |
Mandal, Suvendu; Pradeep, Konda Gokuldoss; Zaefferer, Stefan; Raabe, Dierk; | A novel approach to measure grain boundary segregation in bulk polycrystalline materials in dependence of the boundaries’ five rotational degrees of freedom | Scripta Materialia Vol. 81 No. Page 16-19 | Pergamon |
2014 |
Journal |
Mandal, Sumantra; Jayalakshmi, M; Bhaduri, AK; Sarma, V Subramanya; | Effect of strain rate on the dynamic recrystallization behavior in a nitrogen-enhanced 316L (N) | Metallurgical and Materials Transactions A Vol. 45 No. 12 Page 5645-5656 | Springer US |
2014 |
Journal |
Zhang, Han; Pradeep, Konda Gokuldoss; Mandal, Suvendu; Ponge, Dirk; Raabe, Dierk; | New insights into the austenitization process of low-alloyed hypereutectoid steels: Nucleation analysis of strain-induced austenite formation | Acta materialia Vol. 80 No. Page 296-308 | Pergamon |
2013 |
Journal |
Samantaray, Dipti; Phaniraj, C; Bhaduri, AK; Mandal, Sumantra; Albert, SK; | Resisting stress for constitutive analysis of hot deformation in modified 9Cr–1Mo (P91) steel | Materials Science and Engineering: A Vol. 560 No. Page 170-177 | Elsevier |
2012 |
Journal |
Mandal, Sumantra; Bhaduri, AK; Sarma, V Subramanya; | Influence of state of stress on dynamic recrystallization in a titanium-modified austenitic stainless steel | Metallurgical and Materials Transactions A Vol. 43 No. 2 Page 410-414 | Springer US |
2012 |
Journal |
Mandal, Sumantra; Bhaduri, AK; Sarma, V Subramanya; | Role of twinning on dynamic recrystallization and microstructure during moderate to high strain rate hot deformation of a Ti-modified austenitic stainless steel | Metallurgical and Materials Transactions A Vol. 43 No. 6 Page 2056-2068 | Springer US |
2012 |
Journal |
Mandal, Sumantra; Bhaduri, AK; Raj, Baldev; Sarma, V Subramanya; | Dynamic recrystallisation during isothermal hot deformation in a titanium modified austenitic stainless steel | Materials Science Forum Vol. 715 No. Page 140-145 | Trans Tech Publications Ltd |
2012 |
Journal |
Samantaray, Dipti; Mandal, Sumantra; Albert, Shaju K; Bhaduri, AK; Jayakumar, Tammana; | Thermally activated deformation of a high-nitrogen grade 316LN stainless steel under compressive loading | Materials Science Forum Vol. 710 No. Page 477-482 | Trans Tech Publications Ltd |
2012 |
Journal |
Samantaray, Dipti; Mandal, Sumantra; Kumar, Vinod; Albert, SK; Bhaduri, AK; Jayakumar, T; | Optimization of processing parameters based on high temperature flow behavior and microstructural evolution of a nitrogen enhanced 316L (N) stainless steel | Materials Science and Engineering: A Vol. 552 No. Page 236-244 | Elsevier |
2012 |
Journal |
Mandal, Sumantra; Bhaduri, AK; Sarma, V Subramanya; | Origin and role of ?3 boundaries during thermo-mechanical processing of a Ti-modified austenitic stainless steel | Materials Science Forum Vol. 702 No. Page 714-717 | Trans Tech Publications Ltd |
2011 |
Journal |
Mandal, Sumantra; Bhaduri, AK; Sarma, V Subramanya; | A study on microstructural evolution and dynamic recrystallization during isothermal deformation of a Ti-modified austenitic stainless steel | Metallurgical and Materials Transactions A Vol. 42 No. 4 Page 1062-1072 | Springer US |
2011 |
Journal |
Samantaray, Dipti; Mandal, Sumantra; Bhaduri, AK; Venugopal, S; Sivaprasad, PV; | Analysis and mathematical modelling of elevated temperature flow behaviour of austenitic stainless steels | Materials Science and Engineering: A Vol. 528 No. 43926 Page 1937-1943 | Elsevier |
2011 |
Journal |
Phaniraj, C; Samantaray, Dipti; Mandal, Sumantra; Bhaduri, AK; | A new relationship between the stress multipliers of Garofalo equation for constitutive analysis of hot deformation in modified 9Cr–1Mo (P91) steel | Materials Science and Engineering: A Vol. 528 No. 18 Page 6066-6071 | Elsevier |
2011 |
Journal |
Samantaray, Dipti; Mandal, Sumantra; Bhaduri, AK; | Optimization of hot working parameters for thermo-mechanical processing of modified 9Cr–1Mo (P91) steel employing dynamic materials model | Materials Science and Engineering: A Vol. 528 No. 15 Page 5204-5211 | Elsevier |
2011 |
Journal |
Samantaray, Dipti; Mandal, Sumantra; Bhaduri, AK; | A critical comparison of various data processing methods in simple uni-axial compression testing | Materials & Design Vol. 32 No. 5 Page 2797-2802 | Elsevier |
2011 |
Journal |
Samantaray, Dipti; Phaniraj, C; Mandal, Sumantra; Bhaduri, AK; | Strain dependent rate equation to predict elevated temperature flow behavior of modified 9Cr-1Mo (P91) steel | Materials Science and Engineering: A Vol. 528 No. 3 Page 1071-1077 | Elsevier |
2011 |
Journal |
Samantaray, Dipti; Mandal, Sumantra; Bhaduri, AK; | Characterization of deformation instability in modified 9Cr–1Mo steel during thermo-mechanical processing | Materials & Design Vol. 32 No. 2 Page 716-722 | Elsevier |
2011 |
Journal |
Samantaray, Dipti; Mandal, Sumantra; Phaniraj, C; Bhaduri, AK; | Flow behavior and microstructural evolution during hot deformation of AISI Type 316 L (N) austenitic stainless steel | Materials Science and Engineering: A Vol. 528 No. 29-30 Page 8565-8572 | Elsevier |
2011 |
Journal |
Mandal, Sumantra; Bhaduri, AK; Sarma, V Subramanya; | One-step and iterative thermo-mechanical treatments to enhance ?3 n boundaries in a Ti-modified austenitic stainless steel | Journal of Materials Science Vol. 46 No. 1 Page 275-284 | Springer US |
2011 |
Journal |
Mandal, Sumantra; Bhaduri, AK; Sarma, V Subramanya; | Origin and role of ?3 boundaries during thermo-mechanical processing of a Ti-modified austenitic stainless steel | Materials Science Forum Vol. 1517 No. 702 Page 714 | |
2011 |
Journal |
Jayakumar, T; Mandal, Sumantra; Saibaba, Saroja; Albert, Shaju K; | In-core materials for present and future Indian Fast Breeder Reactors: a chronological evolution | Proceedings of the second international conference on advances in nuclear materials: abstract booklet and souvenir Vol. No. Page | |
2010 |
Journal |
Samantaray, Dipti; Mandal, Sumantra; Bhaduri, AK; | Constitutive analysis to predict high-temperature flow stress in modified 9Cr–1Mo (P91) steel | Materials & Design Vol. 31 No. 2 Page 981-984 | Elsevier |
2010 |
Journal |
Mandal, Sumantra; Sivaprasad, PV; Sarma, V Subramanya; | Dynamic recrystallization in a Ti modified austenitic stainless steel during high strain rate deformation | Materials and Manufacturing Processes Vol. 25 No. 43833 Page 54-59 | Taylor & Francis |
2010 |
Journal |
Samantaray, Dipti; Mandal, Sumantra; Bhaduri, AK; Sivaprasad, PV; | An overview on constitutive modelling to predict elevated temperature flow behaviour of fast reactor structural materials | Transactions of the Indian Institute of Metals Vol. 63 No. 6 Page 823-831 | Springer-Verlag |
2010 |
Journal |
Mandal, S; Kumar, S; Kumar, A; Sivaprasad, PV; Samajdar, I; Jayakumar, T; Raj, Baldev; | Ultrasonic Attenuation to Characterize Dynamically Recrystallized Microstructure in a 15Cr–15Ni–2.2 Mo–Ti Modi?ed Austenitic Stainless Steel | Advances in Stainless Steels Vol. No. Page 125 | Universities Press |
2010 |
Journal |
Mandal, Sumantra; Bhaduri, AK; Sarma, V Subramanya; | Grain boundary engineering in alloy D9 through thermo-mechanical processing: influence of process variables and aspects of micro-mechanisms | International Journal of Advances in Engineering Sciences and Applied Mathematics Vol. 2 No. 4 Page 149-160 | Springer-Verlag |
2010 |
Journal |
Mandal, Sumantra; Sivaprasad, PV; Dube, RK; | HOT WORKING AND MODELING OF THE RESULTING MICROSTRUCTURE OF D-9 STAINLESS STEEL USING ARTIFICIAL NEURAL NETWORKS | Vol. No. Page | |
2010 |
Journal |
Raj, Baldev; Jayakumar, T; Bhaduri, AK; Mandal, Sumantra; | Development of materials and manufacturing technologies for Indian fast reactor programme | Vol. No. Page | |
2010 |
Journal |
Mandal, S; Kumar, A; Sivaprasad, PV; Jayakumar, T; Baldev, Raj; Kumar, S; Samajdar, I; | A new methodology based on ultrasonic attenuation to characterize dynamically recrystallized microstructure in a 15Cr-15Ni-2.2 Mo-Ti modified austenitic stainless steel | Advances in stainless steels Vol. No. Page | |
2009 |
Journal |
Mandal, Sumantra; Rakesh, V; Sivaprasad, PV; Venugopal, S; Kasiviswanathan, KV; | Constitutive equations to predict high temperature flow stress in a Ti-modified austenitic stainless steel | Materials Science and Engineering: A Vol. 500 No. 43832 Page 114-121 | Elsevier |
2009 |
Journal |
Mandal, Sumantra; Sivaprasad, PV; Venugopal, S; Murthy, KPN; | Artificial neural network modeling to evaluate and predict the deformation behavior of stainless steel type AISI 304L during hot torsion | Applied Soft Computing Vol. 9 No. 1 Page 237-244 | Elsevier |
2009 |
Journal |
Samantaray, Dipti; Mandal, Sumantra; Bhaduri, AK; | A comparative study on Johnson Cook, modified Zerilli–Armstrong and Arrhenius-type constitutive models to predict elevated temperature flow behaviour in modified 9Cr–1Mo steel | Computational Materials Science Vol. 47 No. 2 Page 568-576 | Elsevier |
2009 |
Journal |
Samantaray, Dipti; Mandal, Sumantra; Borah, Utpal; Bhaduri, AK; Sivaprasad, PV; | A thermo-viscoplastic constitutive model to predict elevated-temperature flow behaviour in a titanium-modified austenitic stainless steel | Materials Science and Engineering: A Vol. 526 No. 43832 Page 43836 | Elsevier |
2009 |
Journal |
Ramana, KVS; Anita, T; Mandal, Sumantra; Kaliappan, S; Shaikh, H; Sivaprasad, PV; Dayal, RK; Khatak, HS; | Effect of different environmental parameters on pitting behavior of AISI type 316L stainless steel: experimental studies and neural network modeling | Materials & Design Vol. 30 No. 9 Page 3770-3775 | Elsevier |
2009 |
Journal |
Mandal, Sumantra; Bhaduri, AK; Sarma, V Subramanya; | Studies on twinning and grain boundary character distribution during anomalous grain growth in a Ti-modified austenitic stainless steel | Materials Science and Engineering: A Vol. 515 No. 43832 Page 134-140 | Elsevier |
2009 |
Journal |
Mandal, Sumantra; Sivaprasad, PV; Barat, P; Raj, Baldev; | An overview of neural network based modeling in alloy design and thermomechanical processing of austenitic stainless steels | Materials and Manufacturing Processes Vol. 24 No. 2 Page 219-224 | Taylor & Francis |
2009 |
Journal |
Ai, M; Avdeev, G; Bagheri, R; Bettles, CJ; Bhaduri, AK; Capdevila-Montes, C; Castro, F; Chao, J; Chen, GL; Chen, J; | journal homepage: www. elsevier. com/locate/msea | Materials Science and Engineering A Vol. 515 No. Page 215-216 | |
2008 |
Journal |
Grain boundary microstructural control through thermo-mechanical processing in a Titanium modified austenitic stainless steel by Mandal S., Sivaprasad P. , Raj B. , Sarma V. Metallurgical and Materials Transactions A 39 3298-3307 (2008) |
2008 |
Journal |
Mandal, Sumantra; Sivaprasad, PV; Venugopal, S; Murthy, KPN; Raj, Baldev; | Artificial neural network modeling of composition–process–property correlations in austenitic stainless steels | Materials Science and Engineering: A Vol. 485 No. 43832 Page 571-580 | Elsevier |
2008 |
Journal |
Mandal, Sumantra; Sivaprasad, PV; Raj, Baldev; Sarma, V Subramanya; | Grain boundary microstructural control through thermomechanical processing in a titanium-modified austenitic stainless steel | Metallurgical and Materials Transactions A Vol. 39 No. 13 Page 3298-3307 | Springer US |
2008 |
Journal |
Mandal, Sumantra; Mishra, SK; Kumar, Anish; Samajdar, I; Sivaprasad, PV; Jayakumar, T; Raj, Baldev; | Evolution and characterization of dynamically recrystallized microstructure in a titanium-modified austenitic stainless steel using ultrasonic and EBSD techniques | Philosophical Magazine Vol. 88 No. 6 Page 883-897 | Taylor & Francis |
2008 |
Journal |
Mandal, Sumantra; Sivaprasad, P; Sarma, V; | Microstructural Modification in a 15Cr?15Ni?2.2 Mo?Ti Modified Austenitic Stainless Steel through Twin Induced Grain Boundary Engineering | Applications of Texture Analysis Vol. No. Page 313-321 | John Wiley & Sons, Inc. Hoboken, NJ, USA |
2007 |
Journal |
Mandal, Sumantra; Sivaprasad, PV; Dube, R Kinetics; | Kinetics, mechanism and modelling of microstructural evolution during thermomechanical processing of a 15Cr–15Ni–2.2 Mo–Ti modified austenitic stainless steel | Journal of materials science Vol. 42 No. 8 Page 2724-2734 | Kluwer Academic Publishers-Plenum Publishers |
2007 |
Journal |
Mandal, Sumantra; Sivaprasad, PV; Dube, RK; | Modeling microstructural evolution during dynamic recrystallization of alloy D9 using artificial neural network | Journal of Materials Engineering and Performance Vol. 16 No. 6 Page 672 | Springer US |
2007 |
Journal |
Mandal, Sumantra; Sivaprasad, PV; Venugopal, S; | Capability of a feed-forward artificial neural network to predict the constitutive flow behavior of as cast 304 stainless steel under hot deformation | Vol. No. Page | |
2007 |
Journal |
Mandal, Sumantra; Sivaprasad, PV; Dube, RK; Raj, Baldev; | Kinetics, Mechanism and Modeling of Microstructural Evolution during Dynamic Recrystallization in a 15Cr-15Ni-2.2 Mo-Ti Modified Austenitic Stainless Steel | Materials science forum Vol. 550 No. Page 601-606 | Trans Tech Publications Ltd |
2007 |
Journal |
Mandal, Sumantra; Kumar, A; Sivaprasad, PV; Jayakumar, T; Raj, B; | Characterisation of microstructural evolution during thermomechanical processing of 15Cr–15Ni–2· 2Mo–Ti modified austenitic stainless steel (alloy D9) using ultrasonic measurements | Materials Science and Technology Vol. 23 No. 11 Page 1381-1386 | Taylor & Francis |
2007 |
Journal |
Mandal, S; Sivaprasad, PV; Dube, RK; Raj, B; | Modelling and Advanced Techniques-Kinetics, Mechanism and Modeling of Microstructural Evolution during Dynamic Recrystallization in a 15Cr-15Ni-2.2 Mo-Ti Modified Austenitic Stainless Steel | Materials Science Forum Vol. 550 No. Page 601-606 | Aedermannsdorf, Switzerland: Trans Tech Publications, 1984- |
2006 |
Journal |
Mandal, Sumantra; Sivaprasad, PV; Venugopal, S; Murthy, KPN; | Constitutive flow behaviour of austenitic stainless steels under hot deformation: artificial neural network modelling to understand, evaluate and predict | Modelling and Simulation in Materials Science and Engineering Vol. 14 No. 6 Page 1053 | IOP Publishing |
2006 |
Journal |
Sivaprasad, PV; Mandal, Sumantra; Sridhar, Venugopal; Narayanan, C; Shanmugam, V; Raj, Baldev; | Artificial neural network modelling of the tensile properties of indigenously developed 15 Cr-15 Ni-2. 2 Mo-Ti modified austenitic stainless steel. | Transactions of the Indian Institute of Metals Vol. 59 No. 4 Page 437-445 | |
2006 |
Journal |
Mandal, S; Sivaprasad, PV; Murthy, KPN; Raj, B; | Modeling the Hot Deformation Behaviour of a 15Cr-15Ni-2.2 Mo-0.3 Ti Modified Austenitic Stainless Steel Using Artificail Neural Network | METALS MATERIALS AND PROCESSES Vol. 18 No. 2 Page 159 | MESHAP SCIENCE PUB |
2006 |
Journal |
Mandal, Sumantra; Sivaprasad, PV; Murthy, KPN; Raj, Baldev; | Modeling constitutive behavior of a 15Cr-15Ni-2.2 Mo-Ti modified austenitic stainless steel under hot compression using artificial neural network | International conference on Statistical Mechanics of Plasticity and Related Instabilities Vol. 23 No. Page 59 | SISSA Medialab |
1999 |
Journal |
Mandal, S; Lakhotia, SC; | Role of Bar locus in development of legs and antenna in Drosophila melanogaster | Current Science Vol. No. Page 953-958 | Current Science Association |
1999 |
Journal |
Sikdar, PK; Mandal, S; | Air pollution management programme of Calcutta | Journal of Environmental Studies and Policy Vol. 2 No. 2 Page 71-86 | TATA ENERGY RESEARCH INSTITUTE |