| 270 |
W.R. Ilaham, R.S. Maurya and T. Laha, Investigation of high-temperature oxidation behavior of silicon added 14Cr nanostructured ferritic alloys synthesized via mechanical alloying and spark plasma sintering, Materials Research Express, v 6, 1150f6 (2019) |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 275 |
W.R Ilaham, L. Singh, A. Bhadauria, T. Laha, Effect of Si addition on the microstructure and mechanical property of nanostructured oxide dispersion strengthened ferritic steel synthesized via mechanical alloying and spark plasma sintering, Fusion Engineer |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 318 |
V. Viswanathan, T. Laha, K. Balani, A. Agarwal, S. Seal, “Challenges and advances in nanocomposite processing techniques”, Mat Sci Eng R, v 54, 2006, pp. 121-285, (IMPACT FACTOR: 17.73) |
2006 |
Journal |
Prof. Tapas Laha |
|
View |
| 285 |
Thirunavukarasu, S. Kundu, D. Roy, T. Laha, S. Chatterjee, Exhibition of veiled features in diffusion bonding of titanium alloy and stainless steel via copper, Metallurgical Research & Technology, v 115, 1-15 (2017) |
2017 |
Journal |
Prof. Tapas Laha |
|
View |
| 282 |
T. Thomas, C. Zhang, A. Sahu, P. Nautiyal, A. Loganathan, T. Laha, B. Boesl, A. Agarwal, Effect of Graphene Reinforcement on the Mechanical Properties of Ti2AlC Ceramic Fabricated by Spark Plasma Sintering, Materials Science & Engineering A, v 728, 45-53 |
2018 |
Journal |
Prof. Tapas Laha |
|
View |
| 315 |
T. Laha, Y. Liu and A. Agarwal, “Carbon Nanotube Reinforced Aluminum Nanocomposite via Plasma and High Velocity Oxy-Fuel Spray Forming: A Comparative Analysis”, J Nanosci Nanotech, v 7, 2007, pp. 515-524 |
2007 |
Journal |
Prof. Tapas Laha |
|
View |
| 310 |
T. Laha, Y. Chen, K. Balani and A. Agarwal, “Nanomechanical Properties of Hafnium Nitride Coating” Scripta Mater, v 58, 2008, pp. 1121-1124 |
2008 |
Journal |
Prof. Tapas Laha |
|
View |
| 309 |
T. Laha, Y. Chen, D. Lahiri and A. Agarwal, “Tensile Properties of Carbon Nanotube Reinforced Aluminum Nanocomposite Fabricated by Plasma Spray Forming”, Composites: Part A, v 40, 2009, pp 589–594 |
2009 |
Journal |
Prof. Tapas Laha |
|
View |
| 314 |
T. Laha, S. Kuchibhatla, S. Seal, W. Li and A. Agarwal, “Interfacial Phenomena in Thermally Sprayed Al-Based Nanocomposites Reinforced with Carbon Nanotubes”, Acta Mater, v 55, 2007, pp. 1059-1066 |
2007 |
Journal |
Prof. Tapas Laha |
|
View |
| 336 |
T. Laha, R. Balasubramaniam, A. Tewari and M.N. Mungole Electrochemical behavior of Fe-28Al-2C after high temperature hydrogen treatment, Proceedings of International Symposium on Corrosion Science in the 21st Century, UMIST, U.K., July, 2003 |
2003 |
Conference |
Prof. Tapas Laha |
|
View |
| 334 |
T. Laha, K. Balani, B. Potens, M. Andara, A. Agarwal, S. Patil and S. Seal, Plasma Engineered Nanostructured Spheres, Surface and Interfaces of Nanostructured Materials and Trends in LIGA, Miniaturization and Nanoscale Materials Conference Proceedings, TM |
2004 |
Conference |
Prof. Tapas Laha |
|
View |
| 321 |
T. Laha, K. Balani, A. Agarwal, S. Patil, S. Seal, Synthesis of Nanostructured Spherical Aluminum Oxide Powders by Plasma Engineering, Met Mat Trans A, v 36A, 2005, pp. 301-309 |
2005 |
Journal |
Prof. Tapas Laha |
|
View |
| 327 |
T. Laha, J. Shankar, R. Balasubramaniam, “Material and Electrochemical Characterization of Ancient Indian OCP period copper”, Indian J History of Sci, v 37, n 4, 2002, pp. 321-329 |
2002 |
Journal |
Prof. Tapas Laha |
|
View |
| 326 |
T. Laha, A. Tewari, R. Balasubramaniam, M.N. Mungole, R.G. Baligidad, Microstructural Evolution in Iron Aluminide Fe-28Al-2C after High-Temperature Hydrogen Treatment, Met Mat Trans A, v 35A, n 6, 2004, pp. 1789-1798 |
2004 |
Journal |
Prof. Tapas Laha |
|
View |
| 319 |
T. Laha, A. Agarwal, Tim McKechnie, S. Seal, “Synthesis of Bulk Nanostructured Aluminum Alloy Component through Vacuum Plasma Spray Technique”, Acta Mater, v 53, 2005, pp. 5429-5438 |
2005 |
Journal |
Prof. Tapas Laha |
|
View |
| 323 |
T. Laha, A. Agarwal, Tim McKechnie, S. Seal, “Synthesis and Characterization of Plasma Spray Formed Carbon Nanotube Reinforced Aluminum Composite”, Mat Sci Eng A, v 381, 2004, pp. 249–258 |
2004 |
Journal |
Prof. Tapas Laha |
|
View |
| 320 |
T. Laha, A. Agarwal, A Comparative Study to Estimate Effective Elastic Modulus of Laser-Engineered Composite Boride Coating, Adv Eng Mater, v 7, n 7, 2005, pp. 626-628 |
2005 |
Journal |
Prof. Tapas Laha |
|
View |
| 324 |
T. Laha, A. Agarwal and T. McKechnie, “HVOF Forming Nanostructured Hypereutectic via High-Velocity Oxyfuel Spray Deposition”, JOM, v 1, 2004, pp. 54-56 |
2004 |
Journal |
Prof. Tapas Laha |
|
View |
| 333 |
T. Laha, A. Agarwal and T. McKechnie, Comparative Evaluation of Plasma and High Velocity Oxy-Fuel Spray Formed Carbon Nanotube Reinforced Al-Based Composite, Surface Engineering in Materials, TMS Annual Meeting, San Francisco, USA, 2005, pp. 49-59 |
2005 |
Conference |
Prof. Tapas Laha |
|
View |
| 311 |
T. Laha and A. Agarwal, “Effect of Sintering on Thermally Sprayed Carbon Nanotube Reinforced Aluminum Nanocomposite”, Mat Sci Eng A, v 480, 2008, pp. 323-332 |
2008 |
Journal |
Prof. Tapas Laha |
|
View |
| 901 |
Singh, Lavish K; Bhadauria, Alok; Oraon, Akash; Laha, Tapas; | Spark plasma sintered Al-0.5 wt% MWCNT nanocomposite: Effect of sintering pressure on the densification behavior and multi-scale mechanical properties | Diamond and Related Materials Vol. 91 No. Page 144-155 | Elsevier |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 911 |
Singh, Lavish K; Bhadauria, Alok; Laha, Tapas; | Comparing the strengthening efficiency of multiwalled carbon nanotubes and graphene nanoplatelets in aluminum matrix | Powder Technology Vol. 356 No. Page 1059-1076 | Elsevier |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 899 |
Singh, Lavish K; Bhadauria, Alok; Laha, Tapas; | Al-MWCNT nanocomposite synthesized via spark plasma sintering: effect of powder milling and reinforcement addition on sintering kinetics and mechanical properties | Journal of Materials Research and Technology Vol. 8 No. 1 Page 503-512 | Elsevier |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 915 |
Sahu, Ashutosh; Maurya, Ram Sajeevan; Laha, Tapas; | Non-isothermal crystallization behavior of Al86Ni8Y6 and Al86Ni6Y4. 5Co2La1. 5 melt-spun ribbons, milled ribbon particles and bulk samples consolidated by spark plasma sintering | Thermochimica Acta Vol. 684 No. Page 178486 | Elsevier |
2020 |
Journal |
Prof. Tapas Laha |
|
View |
| 906 |
Sahu, Ashutosh; Maurya, Ram Sajeevan; Laha, Tapas; | Effect of sintering temperature on phase evolution of Al86Ni6Y4. 5Co2La1. 5 bulk amorphous composites synthesized via mechanical alloying and spark plasma sintering | Progress in Natural Science: Materials International Vol. 29 No. 1 Page 32-40 | Elsevier |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 924 |
Sahu, Ashutosh; Maurya, Ram Sajeevan; Dinda, Soumitra; Laha, Tapas; | Phase Evolution-Dependent Nanomechanical Properties of Al86Ni8Y6 and Al86Ni6Y4.5Co2La1.5 Spark Plasma-Sintered Bulk Amorphous Composites | Metallurgical and Materials Transactions A Vol. 51 No. Page 5110-5119 | Springers |
2020 |
Journal |
Prof. Tapas Laha |
|
View |
| 921 |
Sahu, Ashutosh; Maurya, Ram Sajeevan; Dinda, Soumitra; Laha, Tapas; | Phase Evolution-Dependent Nanomechanical Properties of Al 86 Ni 8 Y 6 and Al 86 Ni 6 Y 4.5 Co 2 La 1.5 Spark Plasma-Sintered Bulk Amorphous Composites | Metallurgical and Materials Transactions A Vol. No. Page 44105 | Springer US |
2020 |
Journal |
Prof. Tapas Laha |
|
View |
| 903 |
Sahu, A; Maurya, RS; Laha, T; | Comparative study on sintering behavior of Al86Ni6Y4. 5Co2La1. 5 mechanically alloyed amorphous powder and melt-spun ribbon | Advanced Powder Technology Vol. 30 No. 4 Page 691-699 | Elsevier |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 317 |
S.R. Bakshi, T. Laha, K. Balani, A. Agarwal, J. Karthikeyan, “Interfacial Strength of Cold Sprayed Aluminum Coatings”, Surface Eng, v 23, 2007, pp. 18-22 |
2007 |
Journal |
Prof. Tapas Laha |
|
View |
| 268 |
S.K. Nayak, A. Kumar, K. Sarkar, A. Pathak, A. Banerjee, T. Laha, A Study on the Corrosion Inhibition of Fe-Based Amorphous/Nanocrystalline Coating Synthesized by High-Velocity Oxy-Fuel Spraying in an Extreme Environment, Journal of Thermal Spray Technolo |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 262 |
S.K. Nayak, A. Kumar, A. Pathak, A. Banerjee, T. Laha, Multi-scale mechanical properties of Fe-based amorphous/nanocrystalline composite coating synthesized by HVOF spraying, Journal of Alloys and Compounds, v 825, Article 154120 (2020) |
2020 |
Journal |
Prof. Tapas Laha |
|
View |
| 312 |
S. R. Bakshi, K. Balani, T. Laha, J. Tercero and A. Agarwal, “Nanomechanical and Nanoscratch Properties of Multiwalled Carbon Nanotube Reinforced Ultrahigh Molecular Weight Polyethylene Coatings”, JOM, v 55, 2007, pp. 50-53 |
2007 |
Journal |
Prof. Tapas Laha |
|
View |
| 306 |
S. Kalmodia, S. Goenka, T. Laha, D. Lahiri, B. Basu, K. Balani, Microstructure, mechanical properties, and in vitro biocompatibility of spark plasma sintered hydroxyapatite–aluminum oxide–carbon nanotube composite, Mat Sci Eng C, v 30, n 8, 2010, pp. 1162 |
2010 |
Journal |
Prof. Tapas Laha |
|
View |
| 274 |
S. Ghosh, P. Das, S. Ganguly, S. Remanan, T.K. Das, S.K. Bhattacharyya, J. Baral, A.K. Das, T. Laha, N.C. Das, 3D?Enhanced, High?Performing, Super?hydrophobic and Electromagnetic?Interference Shielding Fabrics Based on Silver Paint and Their Use in Antiba |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 284 |
Rahman, M. Sribalaji, B. Mukherjee, T. Laha, A. Keshari, Synergistic effect of hybrid carbon nanotube and graphene nanoplatelets reinforcement on processing, microstructure, interfacial stress and mechanical properties of Al2O3 nanocomposites, Ceramics In |
2018 |
Journal |
Prof. Tapas Laha |
|
View |
| 265 |
R.S. Maurya, T. Laha, The Glassy Structure Formation and Phase Evolution in Mechanically Alloyed and Spark Plasma-Sintered Al-TM-RE Alloys, Journal of Materials Engineering and Performance, v 28, 7407-7418 (2019) |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 292 |
R.S. Maurya, T. Laha, Microstructure and phase evolution in spark-plasma-sintered Al86Ni6Y4.5Co2La1.5 glassy alloy, Philosophical Magazine Letters, v 453, 1-7 (2016) |
2016 |
Journal |
Prof. Tapas Laha |
|
View |
| 299 |
R.S. Maurya, T. Laha, Effect of rare earth and transition metal elements on the glass forming ability of mechanical alloyed Al-TM-RE based amorphous alloys, Journal of Materials Science & Technology, 31 (2015) 1118-1124 |
2015 |
Journal |
Prof. Tapas Laha |
|
View |
| 293 |
R.S. Maurya, A. Sahu, T. Laha, Quantitative phase analysis in Al86Ni8Y6 bulk glassy alloy synthesized by consolidating mechanical alloyed amorphous powder via spark plasma sintering, Materials & Design, 93 (2016) 96-103 |
2016 |
Journal |
Prof. Tapas Laha |
|
View |
| 295 |
R.S. Maurya, A. Sahu, T. Laha, Microstructural and phase analysis of Al based bulk metallic glass synthesized by mechanically alloying and consecutive spark plasma sintering with varying consolidation pressure, Advanced Materials Letters, 7 (2016) 187-191 |
2016 |
Journal |
Prof. Tapas Laha |
|
View |
| 294 |
R.S. Maurya, A. Sahu, T. Laha, Effect of consolidation pressure on phase evolution during sintering of mechanically alloyed Al86Ni8Y6 amorphous powders via spark plasma sintering, Materials Science & Engineering A, 649 (2016) 48-56 |
2016 |
Journal |
Prof. Tapas Laha |
|
View |
| 264 |
R.S. Maurya, A. Sahu and T. Laha, Nanoindentation study on Al86Ni8Y6 glassy alloy synthesized via mechanical alloying and spark plasma sintering, Journal of Materials Research, available online, 2020 |
2020 |
Journal |
Prof. Tapas Laha |
|
View |
| 291 |
R. S. Maurya, A. Sahu, T. Laha, Effect of sintering temperature on phase transformation during consolidation of mechanically alloyed Al86Ni6Y6Co2 amorphous powders by spark plasma sintering, Journal of Non-Crystalline Solids, 453, 1-7 (2016) |
2016 |
Journal |
Prof. Tapas Laha |
|
View |
| 325 |
R. Balasubramaniam, T. Laha and A. Srivastava, “Long Term Corrosion Behaviour of Copper in Soil: A study of archaeological analogues” Mater Corrosion, v 55, n 3, 2004, pp. 194-201 |
2004 |
Journal |
Prof. Tapas Laha |
|
View |
| 918 |
Pohshna, Chwadaka; Mailapalli, Damodhara Rao; Laha, Tapas; | Synthesis of Nanofertilizers by Planetary Ball Milling | Sustainable Agriculture Reviews 40 Vol. No. Page 75-112 | Springer, Cham |
2020 |
Journal |
Prof. Tapas Laha |
|
View |
| 286 |
Patra, R. Saxena, S.K. Karak, T. Laha, S.K. Sahu, Fabrication and characterization of nano-Y2O3 dispersed W-Ni-Mo and W-Ni-Ti-Nb alloys by mechanical alloying and spark plasma sintering, Journal of Alloys and Compounds, 707 Page: 245-250 (2017) |
2017 |
Journal |
Prof. Tapas Laha |
|
View |
| 289 |
Patra, R. Saxena, S.K. Karak, S.K. Sahu, T. Laha, Fabrication and characterization of nano-Y2O3 dispersed W-Ni-Mo and W-Ni-Ti-Nb alloys by mechanical alloying and spark plasma sintering, Journal of Alloys and Compounds, Available online, (2017) |
2017 |
Journal |
Prof. Tapas Laha |
|
View |
| 269 |
P. Bijalwan, A. Kumar, S.K. Nayak, A. Banerjee, M. Dutta, T. Laha, Microstructure and corrosion behaviour of Fe-based amorphous composite coatings developed by atmospheric plasma spraying, Journal of Alloys and Compounds, v 796, 47-54 (2019) |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 910 |
Nayak, Sapan K; Kumar, Anil; Sarkar, Kuntal; Pathak, Abhishek; Banerjee, Atanu; Laha, Tapas; | A Study on the Corrosion Inhibition of Fe-Based Amorphous/Nanocrystalline Coating Synthesized by High-Velocity Oxy-Fuel Spraying in an Extreme Environment | Journal of Thermal Spray Technology Vol. 28 No. 7 Page 1433-1447 | Springer US |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 922 |
Nayak, Sapan K; Kumar, Anil; Sarkar, Kuntal; Banerjee, Atanu; Laha, Tapas; | Mechanistic insight into the role of amorphicity and porosity on determining the corrosion mitigation behavior of Fe-based amorphous/nanocrystalline coating | Journal of Alloys and Compounds Vol. No. Page 156624 | Elsevier |
2020 |
Journal |
Prof. Tapas Laha |
|
View |
| 917 |
Nayak, Sapan K; Kumar, Anil; Pathak, Abhishek; Banerjee, Atanu; Laha, Tapas; | Multi-scale mechanical properties of Fe-based amorphous/nanocrystalline composite coating synthesized by HVOF spraying | Journal of Alloys and Compounds Vol. 825 No. Page 154120 | Elsevier |
2020 |
Journal |
Prof. Tapas Laha |
|
View |
| 916 |
Maurya, Ram Sajeevan; Sahu, Ashutosh; Laha, Tapas; | Nanoindentation study on Al86Ni8Y6 glassy alloy synthesized via mechanical alloying and spark plasma sintering | International Journal of Materials Research Vol. 111 No. 2 Page 160-167 | Carl Hanser Verlag |
2020 |
Journal |
Prof. Tapas Laha |
|
View |
| 914 |
Maurya, Ram S; Laha, Tapas; | The Glassy Structure Formation and Phase Evolution in Mechanically Alloyed and Spark Plasma-Sintered Al-TM-RE Alloys | Journal of Materials Engineering and Performance Vol. 28 No. 12 Page 7407-7418 | Springer US |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 297 |
M. Sribalaji, O.S. Asiq Rahman, T. Laha, A.K. Keshri, Nanoindentation and nanoscratch behavior of electroless deposited nickel-phosphorous coating, Materials Chemistry and Physics, v 177, 220-228 (2016) |
2016 |
Journal |
Prof. Tapas Laha |
|
View |
| 287 |
Loganathan, A. Sahu, C. Rudolf, C. Zhang, S. Rengifo, T. Laha, B. Boesl, A. Agarwal, Multi-scale tribological and nanomechanical behavior of cold sprayed Ti2AlC MAX phase coating, Surface and Coatings Technology, v 334, 384-393 (2018) |
2018 |
Journal |
Prof. Tapas Laha |
|
View |
| 330 |
L.K. Singh, R.S. Maurya, A. Maiti and T. Laha, Al Based Nanocomposites Reinforced with Physically Functionalized Carbon Nanotubes Synthesized via Spark Plasma Sintering, ICMMM 2014, IIT Madras, Chennai, India, August 2014 |
2014 |
Journal |
Prof. Tapas Laha |
|
View |
| 296 |
L.K. Singh, A. Maiti, R.S. Maurya, T. Laha, Al Alloy Nanocomposite Reinforced with Physically Functionalized Carbon Nanotubes Synthesized via Spark Plasma Sintering, Materials & Manufacturing Processes, 31 (2016) 733-738 |
2016 |
Journal |
Prof. Tapas Laha |
|
View |
| 272 |
L.K. Singh, A. Bhadauria, T. Laha, Comparing the strengthening efficiency of multiwalled carbon nanotubes and graphene nanoplatelets in aluminum matrix, Powder Technology, v 356, 1059-1076, (2019) |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 280 |
L.K. Singh, A. Bhadauria, T. Laha, Al-MWCNT nanocomposite synthesized via spark plasma sintering: Effect of powder milling and reinforcement addition on sintering kinetics and mechanical properties, Journal of Materials Research and Technology, v 8, 503-5 |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 281 |
L.K. Singh, A. Bhadauria, S. Jana, T. Laha, Effect of Sintering Temperature and Heating Rate on Crystallite Size, Densification Behaviour and Mechanical Properties of Al-MWCNT Nanocomposite Consolidated via Spark Plasma Sintering, Acta Metallurgica Sinica |
2018 |
Journal |
Prof. Tapas Laha |
|
View |
| 278 |
L.K. Singh, A Bhadauria, A. Oraon, T. Laha, Spark plasma sintered Al-0.5 wt% MWCNT nanocomposite: Effect of sintering pressure on the densification behavior and multi-scale mechanical properties, Diamond & Related Materials, v 91, 144-155 (2019) |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 919 |
Kumar, Anil; Nayak, Sapan Kumar; Sarkar, Kuntal; Banerjee, Atanu; Mondal, Kallol; Laha, Tapas; | Investigation of nano-and micro-scale structural evolution and resulting corrosion resistance in plasma sprayed Fe-based (Fe-Cr-BCP) amorphous coatings | Surface and Coatings Technology Vol. No. Page 126058 | Elsevier |
2020 |
Journal |
Prof. Tapas Laha |
|
View |
| 920 |
Kumar, Anil; Nayak, Sapan Kumar; Pathak, Abhishek; Banerjee, Atanu; Laha, Tapas; | Investigation of nanomechanical deformation behavior in plasma sprayed Fe-based amorphous/nanocrystalline composite coating via multi-scale indentation and nanotribology | Journal of Non-Crystalline Solids Vol. 545 No. Page 120244 | North-Holland |
2020 |
Journal |
Prof. Tapas Laha |
|
View |
| 907 |
Kumar, Anil; Nayak, Sapan Kumar; Bijalwan, Pavan; Dutta, Monojit; Banerjee, Atanu; Laha, Tapas; | Mechanical and corrosion properties of plasma-sprayed Fe-based amorphous/nanocrystalline composite coating | Advances in Materials and Processing Technologies Vol. 5 No. 2 Page 371-377 | Taylor & Francis |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 909 |
Kumar, Anil; Nayak, Sapan K; Bijalwan, Pavan; Dutta, Monojit; Banerjee, Atanu; Laha, Tapas; | Optimization of mechanical and corrosion properties of plasma sprayed low-chromium containing Fe-based amorphous/nanocrystalline composite coating | Surface and Coatings Technology Vol. 370 No. Page 255-268 | Elsevier |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 900 |
Kumar, Anil; Kumar, Rahul; Bijalwan, Pavan; Dutta, Monojit; Banerjee, Atanu; Laha, Tapas; | Fe-based amorphous/nanocrystalline composite coating by plasma spraying: effect of heat input on morphology, phase evolution and mechanical properties | Journal of Alloys and Compounds Vol. 771 No. Page 827-837 | Elsevier |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 322 |
K. Balani, T. Laha, A. Agarwal, J. Karthikeyan, N. Munroe, “Effect of Carrier Gases on Microstructural and Electrochemical Behavior of Cold-Sprayed 1100 Aluminum Coating”, Surface Coatings Tech, v 195, 2005, pp. 272–279 |
2005 |
Journal |
Prof. Tapas Laha |
|
View |
| 313 |
K. Balani, S. R. Bakshi, Y. Chen, T. Laha and A. Agarwal, “Role of Powder Treatment and CNT Dispersion in the Fracture Toughening of Plasma-Sprayed Aluminum Oxide – Carbon Nanotube Ceramic Nanocomposite”, J Nanosci Nanotech, v 7, 2007, pp. 3553-3562 |
2007 |
Journal |
Prof. Tapas Laha |
|
View |
| 316 |
K. Balani, R. Anderson, T. Laha, M. Andara, J. Tercero, E. Crumpler, A. Agarwal, “Plasma-sprayed carbon nanotube reinforced hydroxyapatite coatings and their interaction with human osteoblasts in vitro” Biomater, v 28, 2007, pp 618-624 |
2007 |
Journal |
Prof. Tapas Laha |
|
View |
| 335 |
J. Kathikeyan, T. Laha, K. Balani, A. Agarwal and N. Munroe, Microstructural and Electrochemical Characterization of Cold-Sprayed 1100 Aluminum Coating, ITSC 2004: International Thermal Spray Conference 2004: Advances in Technology and Application, Osaka, |
2004 |
Conference |
Prof. Tapas Laha |
|
View |
| 902 |
Ilaham, Wahida R; Singh, Lavish K; Laha, Tapas; | Effect of Si addition on the microstructure and mechanical property of nanostructured oxide dispersion strengthened ferritic steel synthesized via mechanical alloying and spark plasma sintering | Fusion Engineering and Design Vol. 138 No. Page 303-312 | North-Holland |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 912 |
Ilaham, Wahida R; Maurya, Ram S; Laha, Tapas; | Investigation of high-temperature oxidation behavior of silicon added 14Cr nanostructured ferritic alloys synthesized via mechanical alloying and spark plasma sintering | Materials Research Express Vol. 6 No. 11 Page 1150f6 | IOP Publishing |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 913 |
Ghosh, Sabyasachi; Das, Poushali; Ganguly, Sayan; Remanan, Sanjay; Das, Tushar Kanti; Bhattacharyya, Swarup Krishna; Baral, Joydeep; Das, Amit Kumar; Laha, Tapas; Das, Narayan Ch; | 3D?Enhanced, High?Performing, Super?hydrophobic and Electromagnetic?Interference Shielding Fabrics Based on Silver Paint and Their Use in Antibacterial Applications | ChemistrySelect Vol. 4 No. 40 Page 11748-11754 | |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 305 |
Effect of Sn on the Adhesion between Cu-Sn Alloy Coated Steel and SBR Based Rubber, A. Banerjee, M. Dutta, A.K. Bhowmick and T. Laha, ISIJ, v 15, n 3, 2014, pp. 671-676 |
2014 |
Journal |
Prof. Tapas Laha |
|
View |
| 288 |
Chakraborty, P. Govardhana, A. Mondal, M. Dutta, S.B. Singh, T. Laha, Microstructural development of prior nickel coated hot dipped galvanised coatings by , Journal of Alloys and Compounds, v 699, 648-656 (2017) |
2017 |
Journal |
Prof. Tapas Laha |
|
View |
| 908 |
Bijalwan, Pavan; Kumar, Anil; Nayak, Sapan K; Banerjee, Atanu; Dutta, Monojit; Laha, Tapas; | Microstructure and corrosion behavior of Fe-based amorphous composite coatings developed by atmospheric plasma spraying | Journal of Alloys and Compounds Vol. 796 No. Page 47-54 | Elsevier |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 905 |
Bhadauria, Alok; Singh, Lavish Kumar; Laha, Tapas; | Nanoindentation and nanoscratch properties of graphene nanoplatelets reinforced spark plasma sintered aluminium-based nanocomposite | Advances in Materials and Processing Technologies Vol. 5 No. 2 Page 295-302 | Taylor & Francis |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 923 |
Bhadauria, Alok; Singh, Lavish K; Nayak, Sapan Kumar; Laha, Tapas; | Tensile deformation behavior and strengthening mechanism in graphene nanoplatelet reinforced bimodal grained aluminum nanocomposite synthesized by spark plasma sintering and hot rolling | Materials Characterization Vol. No. Page 110568 | Elsevier |
2020 |
Journal |
Prof. Tapas Laha |
|
View |
| 904 |
Bhadauria, Alok; Singh, Lavish K; Laha, Tapas; | Combined strengthening effect of nanocrystalline matrix and graphene nanoplatelet reinforcement on the mechanical properties of spark plasma sintered aluminum based nanocomposites | Materials Science and Engineering: A Vol. 749 No. Page 14-26 | Elsevier |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 290 |
Banerjee, D. Prusty, M. Dutta, A.K. Bhowmick, T. Laha, Effect of Cu2O thin film on Cu–Sn alloy coated steel surface in promoting interfacial adhesion with rubber, Journal of Adhesion Science & Technology, v 31, 1163-1180 (2017) |
2017 |
Journal |
Prof. Tapas Laha |
|
View |
| 308 |
A.K. Keshri, K. Balani, S.R. Bakshi, V. Singh, T. Laha, S. Seal, A. Agarwal, “Structural Transformation in Carbon Nanotubes during Thermal Spray Processing”, Surface Coatings Tech, v 203, 2009, pp. 2193–2201 |
2009 |
Journal |
Prof. Tapas Laha |
|
View |
| 271 |
A. Sahu. R.S. Maurya, T. Laha, Effect of sintering temperature on phase evolution of Al86Ni6Y4.5Co2La1.5 bulk amorphous composites synthesized via mechanical alloying and spark plasma sintering, Progress in Natural Science, v 29, 32-40 (2019) |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 263 |
A. Sahu, R.S. Maurya, T. Laha, Non-isothermal crystallization behavior of Al86Ni8Y6 and Al86Ni6Y4.5Co2La1.5 melt-spun ribbons, milled ribbon particles and bulk samples consolidated by spark plasma sintering, Thermochimica Acta, v 684, Article 178486 (2020 |
2020 |
Journal |
Prof. Tapas Laha |
|
View |
| 277 |
A. Sahu, R.S. Maurya, T. Laha, Comparative study on sintering behavior of Al86Ni6Y4.5Co2La1.5 mechanically alloyed amorphous powder and melt-spun ribbon, Advanced Powder Technology, v 30, 691-699 (2019) |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 304 |
A. Maiti, R.S. Maurya, T. Laha, Synthesis of Physically Functionalized Carbon Nanotube Reinforced Al- Si Nanocomposite by Spark Plasma Sintering, Materials Science Forum, v 83-786, 2014, pp. 1542-1547 |
2014 |
Journal |
Prof. Tapas Laha |
|
View |
| 332 |
A. Maiti and T. Laha, Role of Sn in Improving the Adhesion between Cu-Sn Alloy Coated Steel and SBR Based Rubber, Proceedings of Advanced Protective Coatings/Surface Engineering, THERMEC 2013, Las Vegas, USA, 2013 |
2013 |
Conference |
Prof. Tapas Laha |
|
View |
| 266 |
A. Kumar, S.K. Nayak, P. Bijalwan, M. Dutta, A. Banerjee, T. Laha, Optimization of mechanical and corrosion properties of plasma sprayed low-chromium containing Fe-based amorphous / nanocrystalline composite coating, Surface and Coatings Technology, v 370 |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 276 |
A. Kumar, S.K. Nayak, P. Bijalwan, M. Dutta, A. Banerjee, T. Laha, Mechanical and corrosion properties of plasma-sprayed Fe-based amorphous/nanocrystalline composite coating, Advances in Materials and Processing Technologies, v 5, 371-377 (2019) |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 329 |
A. Kumar, S.K. Nayak, P. Bijalwan, M. Dutta, A. Banerjee, T. Laha, Mechanical and corrosion properties of atmospheric plasma sprayed Fe-based amorphous/nanocrystalline composite coating, (AMPT 2018), Dublin, Ireland, September 2018 |
2018 |
Conference |
Prof. Tapas Laha |
|
View |
| 267 |
A. Kumar, S.K. Nayak, P. Bijalwan, M. Dutta, A. Banerjee, T. Laha, Fe-based amorphous/nanocrystalline composite coating by plasma spraying: Effect of heat input on morphology, phase evolution and mechanical properties, Journal of Alloys and Compounds, v 7 |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 307 |
A. K. Keshri, S. R. Bakshi, Y. Chen, T. Laha, X. Li, C. Levy and A. Agarwal, Nanomechanical behavior of plasma sprayed PZT coating, Surface Eng, v 25, 2009, pp. 270-275 |
2009 |
Journal |
Prof. Tapas Laha |
|
View |
| 279 |
A. Bhadauria, L.K. Singh, T. Laha, Nanoindentation and nanoscratch properties of graphene nanoplatelets reinforced spark plasma sintered aluminium-based nanocomposite, Advances in Materials and Processing Technologies, v 5, 295-302 (2019) |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 328 |
A. Bhadauria, L.K. Singh, T. Laha, Nanoindentation and nanoscratch properties of graphene nanoplatelets reinforced spark plasma sintered Aluminium based nanocomposite, International Conference on Advances in Materials and Processing Technologies (AMPT 201 |
2018 |
Conference |
Prof. Tapas Laha |
|
View |
| 283 |
A. Bhadauria, L.K. Singh, T. Laha, Effect of physio-chemically functionalized graphene nanoplatelet reinforcement on tensile properties of aluminum nanocomposite synthesized via spark plasma sintering, Journal of Alloys and Compounds, v 748, 783-797 (2018 |
2018 |
Journal |
Prof. Tapas Laha |
|
View |
| 273 |
A. Bhadauria, L.K. Singh, T. Laha, Combined strengthening effect of nanocrystalline matrix and graphene nanoplatelet reinforcement on the mechanical properties of spark plasma sintered aluminum based nanocomposites, Materials Science & Engineering A, v 74 |
2019 |
Journal |
Prof. Tapas Laha |
|
View |
| 300 |
A. Banerjee, M. Dutta, S. Bysakh, A.K. Bhowmick, T. Laha, Microstructural evolution in Cu-Sn coating with varying Sn content on steel substrate and its effect on interfacial adhesion, Surface Coating & Technology, 262 (2015) 200–209 |
2015 |
Journal |
Prof. Tapas Laha |
|
View |
| 301 |
A. Banerjee, M. Dutta, S. Bysakh, A.K. Bhowmick, T. Laha, A novel coating strategy towards improving interfacial adhesion strength of Cu-Sn alloy coated steel with vulcanized rubber, Applied Surface Science, 313 (2014) pp 804–816 |
2014 |
Journal |
Prof. Tapas Laha |
|
View |
| 303 |
A. Banerjee, M. Dutta, S. Bysakh, A.K. Bhowmick and T. Laha, Role of Sn on the adhesion in Cu-Sn alloy coated steel – rubber interface, Journal of Adhesion Science & Technology, v 28, n 11, 2014, pp. 987-100 |
2014 |
Journal |
Prof. Tapas Laha |
|
View |
| 302 |
A. Banerjee, M. Dutta, A.K. Bhowmick, T. Laha, Effect of Cu strike coating on adhesion between Cu-Sn coated steel and rubber, Journal of Adhesion Science and Technology, Journal of Adhesion Science & Technology, v 28, n 16, 2014, pp. 1610-1628 |
2014 |
Journal |
Prof. Tapas Laha |
|
View |
| 331 |
A. Banerjee, M. Dutta and T. Laha, Synthesis of Al-MWCNT Nanocomposites via Spark plasma Sintering, Proccedings of Composites and Nanocomposites, THERMEC 2013, Las Vegas, USA, 201 |
2013 |
Conference |
Prof. Tapas Laha |
|
View |
| 298 |
A Maiti, L. Reddy, F. Chen, L. Zhang, J.M. Schoenung, E.J. Lavernia, T. Laha, Carbon Nanotube reinforced Al alloy-based nanocomposites via spark plasma sintering, Journal of Composite Materials, 49 (2015)1937–1946 |
2015 |
Journal |
Prof. Tapas Laha |
|
View |
